Jump to content

Recommended Posts

Hello OG Xbox forums, I've worked myself into a pickle again.

The short version:

I need to get a file off of an HDD that throws an error 16 (won't boot, Corrupted dash) but still works. Can I get it off using a second Xbox and a file manager, or do I need to buy an adapter and use Xpolorer 360 to get it off?

 

The long Version: 

While preparing to TSOP flash my Xbox, I was copying saves over from the had drive onto a memory card for safe keeping. However when that didn't work with the UnleashX dash I tried to switch over to the default dash. This corrupted the files and now the Xbox throws an error 16 whenever it tries to boot from the HDD. Since it is an error 16 I can't boot from disc since the Xbox preforms the time check before it checks the DVD drive, and since the Xbox was only softmoded I can't just format a new drive and throw it in. From what I've found online I can use CHIMP and my working TSOP'd Xbox to recover the dash files on this second one, however I need the EEPROM.bin file. Can I get it off using a file manager that can detect both drives using the working TSOP'd Xbox, can CHIMP find the EPROM.bin file on the slave HDD and recover from that, or do I need to purchase an IDE adapter to connect my Drive to a PC via XPLORER 360 and then transfer it over to the XBOX?  

Thanks. 

Link to post
Share on other sites

If the drive that is giving error 16 is locked then without the key the drive can not be read,

You could read the EEprom contents in the error 16 Xbox with a external EEprom read/writer and get the HDD key that way. But in my experience the version 1.6 is a pain in the backside to read the EEprom without removing the chip and connecting it to a external reader/writer.

 

I would fit a modchip even if it is temporary to the error 16 Xbox then you can load a Installation DVD  to repair the HDD

 

This is one of the reasons I don't softmod and I have repaired plenty of soft modded Xbox's because files have been deleted and after they leave here it has a modchip or a re-flashed TSOP.

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By sosai880
      Listing of materials tested:
       
      OSSC Chimeric HDMI Konig component RGB AV optical Composite original  Pound (2020) Mcable gaming Mclassic Monster component x400      Monster component x200    variety of wall chargers and HDMI cables
      All the combinations and configurations were tested.
      Tested on four TV and two Xbox : V 1.6 no modded,  V1.0 XBMC  ( no one did consequential differences ) 
       
      Winner!
      xbox+chimeric+Mclassic mode green (alimented wall) +Mcable gaming (alimented wall)+TV.
       

       
      Explanation
       
      At the begening, the monster component x400 seem perfect.    https://postimg.cc/d7rGj7PT       
      It was better than konig component. 
      The konig get a good quantity of details but not like the monster x400 .
      And his picture is  faded. There is a significant loss of signal.
      The monster x200  was like composite because the three plugs are video x1 and stereo x2. Not three RGB + optical audio like I had thinking.
      Next, I tested all options of the OSSC expecting upgrade my video with a HDMI solution.
      The picture was worst than the monster. 
      The OSSC loose always a part of the signal, event it was alimented, and it work not compatible for this console.
      The pound (with power usb port) was very poor. Yes, it's very better than composite but:  Green filter. Not very clear etc. 
       

      But it's wasn't a problem because I had bet all on the Chimeric.

      Finaly, I recived the chimeric, and horror, the monster component smashes far more once again ,                                                                                                                                                with is colors very realistic and the picture very compatible with the signal source.                                                                                                                                                                           I pluged the mcable and the mclassic, but this changed nothing.   https://postimg.cc/VJKNfHvJ
       
      I thinking pass all my life with monster x400.

      After to have expected an issus of fabrication, I Shipped an message to Chimeric system.                                                                                                                                                         Before to receive a response, I had set up the stuff again, and this is it.  It work fine.                                                                                                                                                            Mclassic was alimented by the pc port, but we need to put it in the wall.                                                                                                                                                                                        We need to find the perfect TV setting too, because the signal is different for PC, RGB etc.                                                                                                                                                           So the best mode need to be (neutral, desatured, wider spectrum, all spectrum of light and colors).
      Now it is better than the monster component.  
      And better than the chimeric only. The stuff do all that it must to do.
      But, after that, I upgraded the output video another time with an astuce.
      I bought some different wall charger more powerful and the video become consequently much higher.
      Now with the good wall charger,
      It's a masterpiece.


      How setting this Winning combination

      Xbox dashboard- Audio : put dolby souround + DTS ( not Dolby digital)
      Mclassic: Mode green( or off). Alimented by wall charger  5v- 1.8 A.  Little bit hight or less.  
      Mcable Gaming: Wall charger 5v -2.4 A
      Tv(Flat): Here my setting like exemple : Cinema , retro éclairage 100, contraste 100,  brillance 63, couleur 50, nuance  +10,                                                                                                               netteté 100, image IA=EF, C.A.T.S=HF , reduc=HF, reduc MPEG=HF, niveau noir=clair.   
      In full screen, on tv 1080p or +, and with this stuff, If the picture is bigger than the window,                                                                                                                                                        to reduce It will do appear more elements in the window but not downgrade the details and the beauty.                                                                                                                               That will generate the details in less pixels, but in number sufficient.
      Other point: More definition your monitor have, more sharp and natural are the edges of all things.   ( Picture 1 to 3) https://postimg.cc/py77F2fG
      But a cheap tv Ultra HD will make the edge wavy.  ( Picture 3 and 4 are with the same poor ultra  HD TV.)
      Boost the signal with good wall charger upgrade the ambiance because the gamma have a better tonality.                                                                                                                              And do that upgrade really the textures too because halo 2 uses an optical illusion of 3d texture. So it's like if surfaces are more detailled.                                                                         And it's like if previous non-existent textures appeared ( metalic, glass).  
       
      Materials description:
      V1,6 Xbox: With hdmi solution, added vertical lines shadow (in the white sky) with halo 2 , but nothing else. It seem to have fast processing capacity. Fable is identical with the two consoles. 
      V1.0 Xbox (XBMC installed): Added horizontal artefacts with all the games and emulators. The picture was identical or less good.  ( But no lines shadow with halo 2)
      POUND (  Second place If with the same settings and stuff ).  Don't have DTS option. Clarity of detail less good than component and chimeric. Green filter.  https://postimg.cc/jWwJ303j
      CHIMERIC: Apply red filter on the Panasonic TC-L32U3 but the color was perfect with the second Pansonic. I corrected it with the settings. Alone, there is no big video differences with the Pound (considering the red filter on the other TV) but give more potential with the extra stuff. Chimeric can do DTS  audio option. 
      MONSTER COMPONENT x400 : Do the best picture and sound for easy and for the cost.  https://postimg.cc/d7rGj7PT   https://postimg.cc/McZcFHnk
      KONIG:  AV +optical + RGB + composite in one.   RGB exemple :  https://postimg.cc/FkFjfQY9    https://postimg.cc/xq7CN2Jt   
      V1.6 OSSC :  With all the settings, x1 and x2 scanline too, and two TV, the signal  loose a part of the intensity. The OSSC was alimented wall but only for the LCD screen I think, no to boost the signal. (Signal is affected in the normal processus of all adaptators).  The picture was pale and bleach. Next,  in X1, there was no difference compared  good component except the precedent problem. Problem 3 : In x2, the game is pixelised like 2D 1987 games. Problem 4: About audio; There is not input hdmi, it need an adaptator for the two cables stereo before plug in,  and there is no alimentation for boost the signal affected by this new stuff, and nothing for boost the signal if we connect the audio directly to the speaker ( using an adaptator too). And it's perhaps not 5.1 dolby sourround or DTS. 
      MCLASSIC : The leds set the format of the resolution, not the quantity of pixels. Mode blue it's for an old square tv and mode green for a larger format. The mode off is like the green. I did not see the visual difference, the pixels are exactly  the same at the same place with the same flashing artefacts . But it's perhaps for another king of  tv or another king of console. After that, it need a good wall charger.  Yes, the pixel shapes are attenuated.
      MCABLE GAMING. The not exspensive and not specialised cable '' Premium hight speed /HEC HDMI '' do the stone and building more realistic than the Mcable because it don't blur a part of the texture. At the same time, the Mcable gaming do the best shiny and polished textures, electric arc, water. It reduce the pixelisation of the game . But if we like the realistic stone and dislike to see psycadelic effects when some thin lines are near each others,  it is an option. Finaly, the Mcable is better than all these kinds of cables because it have the capacity to involve the totality of the signal  and upgrade all lights ambiance, textures, metalic or shiny effects. And is hight quality give the better definition. With a computer, the Mcable show more details than the HEC HDMI, but the xbox have not enough definition for did a difference at this point.  
      TV : The winner was : Panasonic TC-L32U3.  Second place : Panasonic TC-L32X5. The very poor others are : LG 47LN5750, SAMSUNG UN50TU7000F.
       

      Finaly, the https://makemhz.com/  is perhaps better than the chimeric so I will change the chimeric for it and keep all the settings and materials in this set up.     
    • By Marxo
      after a very very long absence from the xbox i would like to bring it back to life and hope to find some support and news here about how things are going in the xbox scene right now.
      Marco

       
    • By N163LPH03N1X
      Once in a while I do my routine check for XCM and Xecuter stuff on eBay.
      I did a check maybe a few weeks ago and there were consoles, chips and pro switches on there.

      Correct me if I'm wrong did everything just sell out or did eBay remove anything with "Xecuter" related to the name.
      Because eBay is a ghost town right now. There's just LEs on there and some scraps.

      Anyone get there listing removed? I know Nintendo cracked on the team so maybe other companies are following up.
      This would be dumb because eBay have been collecting fees on modded consoles for a long time, they would lose out on the market.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.