Paolo Posted March 13, 2021 Report Share Posted March 13, 2021 I've 3 xbox with the soldering pads are destroyed there is just the hole...so there is a chance to solder the leg of the caps to another place? Thanks... 2 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted March 13, 2021 Report Share Posted March 13, 2021 You should post some high quality pictures If you use a image share site and post the links here. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 14, 2021 Author Report Share Posted March 14, 2021 Thanks Dave https://photos.app.goo.gl/fjX7K6ijCqUQLsu8A Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 15, 2021 Author Report Share Posted March 15, 2021 Let me know if there is a chance to fix this problem...:) Quote Link to comment Share on other sites More sharing options...
Baggashite Posted March 16, 2021 Report Share Posted March 16, 2021 Run bodge wires from an unfucked point. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 7 hours ago, Baggashite said: Run bodge wires from an unfucked point. The question is, which point is alternatives? I've soldering skill but i don't know where i need to solder... Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted March 16, 2021 Report Share Posted March 16, 2021 I don't hold a lot of hope as the damage it where there is trace in the middle of the board You could try some links like this. [url=https://postimg.cc/v4PW4RJD][img]https://i.postimg.cc/pdvk1RkQ/PXL-20210316-091643527.jpg[/img][/url] Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted March 16, 2021 Report Share Posted March 16, 2021 The 2 caps down the bottom are for the 5 volt supply and the 3 caps next to the CPU are for the 1.8 volt supply Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 4 hours ago, SS_Dave said: The 2 caps down the bottom are for the 5 volt supply and the 3 caps next to the CPU are for the 1.8 volt supply Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. THanks Dave, so it's enough to link all the caps on the point that you described...really thanks Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 6 minutes ago, Paolo said: THanks Dave, so it's enough to link all the caps on the point that you described...really thanks It's a Challenge try to save its...:) 6 minutes ago, Paolo said: THanks Dave, so it's enough to link all the caps on the point that you described...really thanks Quote Link to comment Share on other sites More sharing options...
hastings298 Posted March 16, 2021 Report Share Posted March 16, 2021 Hope it wasn't your soldering iron that did that damage!!! If it was, don't even attempt it until you get a desoldering gun or at least good flux and lower temps. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 1 hour ago, hastings298 said: Hope it wasn't your soldering iron that did that damage!!! If it was, don't even attempt it until you get a desoldering gun or at least good flux and lower temps. ofcourse not...I've tree very damaged... Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 @SS_Dave no luck...I upgraded the image...what's wrong...the wire are not in the same direction that your...but i think that can work...maybe i think bad... Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted March 16, 2021 Report Share Posted March 16, 2021 41 minutes ago, Paolo said: @SS_Dave no luck...I upgraded the image...what's wrong...the wire are not in the same direction that your...but i think that can work...maybe i think bad... No upgraded image Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 16, 2021 Author Report Share Posted March 16, 2021 (edited) 1 hour ago, SS_Dave said: No upgraded image Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. @SS_Davetry now Edited March 16, 2021 by Paolo Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted March 17, 2021 Report Share Posted March 17, 2021 Here is a link to try a extra wire link but even if this works I think this board will give unreliable performance. [url=https://postimg.cc/MvT4Z10B][img]https://i.postimg.cc/VLBcRRdK/PXL-20210317-083405152.jpg[/img][/url] The Xbox PCB is a multi layer board and the holes for the capacitors also are use to join the central layers This is a example of a multi layer PCB and think of number 3 as the holes for the caps. In my view you should harvest the ram and GPU heatsink and let the board go to landfill. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 17, 2021 Author Report Share Posted March 17, 2021 8 hours ago, SS_Dave said: Here is a link to try a extra wire link but even if this works I think this board will give unreliable performance. [url=https://postimg.cc/MvT4Z10B][img]https://i.postimg.cc/VLBcRRdK/PXL-20210317-083405152.jpg[/img][/url] The Xbox PCB is a multi layer board and the holes for the capacitors also are use to join the central layers This is a example of a multi layer PCB and think of number 3 as the holes for the caps. In my view you should harvest the ram and GPU heatsink and let the board go to landfill. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Thanks..Dave..for your avability...really thanks..for all. Quote Link to comment Share on other sites More sharing options...
tjd2 Posted March 17, 2021 Report Share Posted March 17, 2021 I doubt you have good soldering skills considering you managed to fuck up a through hole pads Quote Link to comment Share on other sites More sharing options...
Paolo Posted March 17, 2021 Author Report Share Posted March 17, 2021 39 minutes ago, tjd2 said: I doubt you have good soldering skills considering you managed to fuck up a through hole pads It's not my fault. I received the xbox in this conditions! Quote Link to comment Share on other sites More sharing options...
tjd2 Posted March 26, 2021 Report Share Posted March 26, 2021 (edited) On 3/17/2021 at 9:30 PM, Paolo said: It's not my fault. I received the xbox in this conditions! oh sorry then thru-hole pads are simple to bodge tho. i bodged pads on duke, which had cracked traces near the analog sticks and it works fine to this day Edited March 26, 2021 by tjd2 Quote Link to comment Share on other sites More sharing options...
Hari125 Posted March 30, 2021 Report Share Posted March 30, 2021 This is really bad. I was going to recomment you to follow the traces that were connected to the caps, remove a bit of the green layer that covers them and then soldering wires that are soldered to the caps, but the board is multilayer and it wont be easy to repair. I'm sorry to say it, but you are doomed. ;-; Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.