Jump to content
OGXbox.com

Recommended Posts

Slayer's v.2.7 2021

This a updated version of the last ORIGINAL version v2.7
from Slayer's without BFM-Bios.

Slayer never used a BFM but the later updated ones does.
Not sure who has made them but they heavily screwed up
the BFM Bioses.

The ORIGIANL Slayer's (without BFM) almost never failed
to boot even, all other installers failed!
(Incl. the horrible BFM modded Slayer's, what a shame).

So that makes Slayer's a useful disc to have on hand if you
run in such problems that your other installers won't boot.

And because I wanted it as original as possible I have not
touched much here, like you can see below.
I have not even changed the name (Slay3r's would look cool)
or versions number.
I just added the year 2021 to it to point out that this
is a REAL ORIGINAL Slayer's with just some little changes.

Hope you guy's like it.
 

Changlog (Slayer's v2.7 2021):

Added : ~ 1200 trainers.
Added : A hand full of nice old skins.
Added : The iND 5003.67 and iND 5004.67 to the flash section.
Added : The option to install XBMC4Gamers (latest build).
        - You can installed also as main dash. :)
Added : The option to install XBMC-Emustation (latest build).
Added : XBpartitioner 1.3.
Added : Enigma NTSC-PAL. (Strange it was linked but not in the ISO)
Added : BiosChecker.
Added : XBox version checker.
Added : Complex Tools
Added : Px HDD Loader
Added : Xored Mini Launcher.
Added : Resctoox to flash the Sharp and Winbond.
        - I also added the option to flash a Sharp or Winbond TSOP.
          For both I choose the EvoX m8+ noDVD because it makes the
          most seens.
Added : A Live Apps menu (8) for quick access of all apps.

UPDATED APPS:
Updated : Config Macig to Rocky5's 1.6.1
Updated : Dvd2XboX to the latest build.
Updated : DVDX to the latest build.

UPDATED DASHBOARDS:
Updated : XBMC to 3.5.3
Updated : Avalaunch to the latest build.
Updated : UnleashX to the latest build.

UPDATED EMULATORS: (Some of them were very very old.)
Updated : ZsnexBox to the latest build.
Updated : pcsxbox to the latest build.
Updated : n64 to Surreal64 CE to the latest build.
Updated : neogenesis to the latest build.
Updated : Colecovision (AdamX) to the latest build.
Updated : A2600 (z26x) to the latest build.

Changed : The bios EvoX bios files to noDVD.(No other changes here)

1fichier Folder Link : https://1fichier.com/dir/xE2qhDTu

Mega Folder Link : https://mega.nz/folder/sF9UQZZY#nPzCaPS9-fkYH2hjZkaf_Q

 

Peace!

Edited by sweetdarkdestiny
  • Like 3
  • Thanks 3
Link to comment
Share on other sites

  • 3 months later...
  • 8 months later...
  • 3 months later...
On 3/16/2022 at 2:59 PM, sweetdarkdestiny said:

You need to burn this iso to a DVD. After that you can boot it and install what you like.

Or he can extract the iso contents and send files using fxp for example and run it from inside like program in case of faulty driver and run it virtually.

 

Edited by vitor
Link to comment
Share on other sites

  • 4 weeks later...

I'm interested in Slayer. I've seen this (I trust this site ALOT more too) but there is a post on another forum that is only 452mb SlaYers_EvoX_Auto-Installer_2.7FINAL.iso and this one is 4.37gb? What is the difference lol.

 

EDIT: PDF attached is a guide included with the 452mb version, looks legit?

SlaYers_EvoX_Auto-Installer_v2.7FINAL.pdf

Edited by KingKrona
PDF attached is a guide included with the 452mb version
Link to comment
Share on other sites

It's packed as an 4.7GB xiso and not as "small as possible" xiso like the original Slayers is packed. And like you already wrote, the original is ~450MB and this one is basicly 770MB (If it would be packed as "small as possible"). So we can see we have 320MB more which is the added and updated stuff I listed in the first post which you may should read.

Over all, not a good start for a first post my frind.

 

Link to comment
Share on other sites

The OGXBox Installer 2021 offers the most options, apps etc. 

Slayers 2.7 2021 is just an "untouched" updated version of the original + the extra stuff listet in the first post. 

To set up a new system I would use OGXBox Installer but it's also good to have a Slayers on hand since it didn't use a BFM bios in this version (Like the original never used one). This can come handy in some situations. 

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.