Soufian Elamriti Posted February 17, 2021 Report Share Posted February 17, 2021 i was going to do this mod usinng a rca pannel connector ,but what type of gauge cable do i need from the mother to the rca connector Quote Link to comment Share on other sites More sharing options...
GoTeamScotch Posted February 17, 2021 Report Share Posted February 17, 2021 Since it carries a low voltage digital signal, the wire doesn't need to be very thick at all. Something like a 15 to 20 guage (~1mm) wire is fine. Thicker wire is okay, but not needed. 1 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted February 17, 2021 Report Share Posted February 17, 2021 I used 2 wires from a cat 5 cable that where twisted together and it is not overly important inside the Xbox any way as the shield of the RCA connector is grounded to the metal cage. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
Soufian Elamriti Posted February 17, 2021 Author Report Share Posted February 17, 2021 thanks guys for the info my brother gave me his old yamaha htr 3063 reciever Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.