Help to identify the type and capacity of 3 electronic components

[eblis749]

Hi

I bought a classic Xbox that has a power problem.
The seller told me he had mistakenly connected the console to a 220V source. the type of PSU is Foxlink 1-row.
Unfortunately, 4 pieces on the power board are apparently damaged, and I do not know the name and capacity of the two electronic pieces. Also, I could not recognize the value of a resistance due to the color change.

I put some pictures of these pieces .If possible, please guide me to identify these pieces.

 

Thanks

 

[SS_Dave]

If you google .22uf safety capacitor that will get you C1

F1 is a 4 amp time lag fuse

VA1 is a varistor, cut the black heat shrink off and google the number, Test it with a ohm meter if it read 0 ohm is failed if it reads open circuit it's still good.

There is a good chance that there is a lot more damage and it would be quicker and cheaper to buy a 2nd hand PSU to suit, if it has a 12 pin single row you need a version 1.0 - 1.1 power supply

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

[eblis749]

Thank you so much

[eblis749]

I have another question

I could not recognize the value of a resistance due to the color change.

I wanted to know, how much resistance value?

 

[SS_Dave]

In a 240 volt it's 4.7k

As it's bleed resistor a 4.7k should be fine in your 110 volt version.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.