Hi i have a Xbox 1.0 with a corrupt bios and i discovered that the TSOP mod wasn’t done before i flashed it and ended up corrupting the bios. I tried the 3 wire trick and that didn’t work and can’t seem to find any bios reflash settings on the Open Xenium mod chip. So that really only leaves me with flashing a new chip and soldering it in. Is that the only option i have?
I have an old Xbox that has an Xecuter 2 chip installed, it still has the stock HDD so i'd like to upgrade it to a 500GB SATA. Weirdly I cannot physically see any chip soldered to the board, I can see some yellow wires going out the front of the console so i'm not sure if this is where the chip is located? (see pic).
In any case I have downloaded the HeXen 2018 installation disc, and I have the necessary parts required to convert from IDE to SATA. Is this disc capable of setting up a HDD with this chip? I took a couple of pics showing my kernel and the fact my current HDD is locked:
I just installed a 2TB SSD in my Xbox, as the previous HDD I had in it died. Once I got a dashboard installed (UnleashX 0.39.0528A), I started copying over my games. After 145 games, I started getting errors during FTP. When required, the FTP client would create subdirectories, but then trying to change in to the newly created sub directory would fail. All file uploads would fail as well. I've tried both FileZilla and WinSCP and both have the same problem.
Here's the error from WinSCP:
Dir already exists in cache! "/F/Games/<game name>/DATA": Directory not found.
I deleted the cache volumes on the Xbox, but the error continues to happen. As it stands, I'm unable to upload anything else to the F volume. There's 708GB free on F, so disk space shouldn't be a problem.
I also did a test using the File Manager app on the Xbox. I created a subdirectory in F:\Games and then copied a file from the E: over to the new subdirectory. The file doesn't show up in the subfolder.
I did have the my games split between F and G before, but that was because of how the volumes were original configured and there wasn't enough space on a single volume. I should be able to fit everything on F, but this issue is stopping me from doing so.
In case it matters, I'm using an M8Plus BIOS with LBA48 support which is patched for the XboxHD+. Both F and G are partitioned to about 972GB each.
Board Life Status
Board startup date: April 23, 2017 12:45:48