Jump to content

Recommended Posts

Here is a TSOP flasher which fits on a 8MB memorycard. 

All game saves which works for the normal softmod works here as well and are included. The DL contains a PAL and a NTSC version. It has a EvoX M8+ noDVD F+G Bios on it in 256kb and 1024kb. And one 256kb with raincoat to flash a Winbond TSOP.  So now no one needs to softmod just to flash the TSOP. And you can simply change the bios files if you like some thing else but for the most the EvoX should be fine.

https://1fichier.com/?ahp5phsesqttr7dznvth

  • Like 1
  • Thanks 2
Link to post
Share on other sites

While i havent confirmed this works it sounds like an awesome tool.  Congrats !!!

Perhaps bundle in Pictures of the main board versions and the points that need to be bridged?    

Also add to the readme  what size bios for what mainboard??

Im thinking that there might be a lot of questions about this so try head them off before the flood?

 

 

Link to post
Share on other sites

This is how I have been modding Xbox's since the start. The 1st TSOP flash I did was done via telnet to the Xbox with nothing on the Xbox screen

 

1872372590_TSOPflashsmall.jpg.21abf2699101fc95aa51205963bc0a52.jpg

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to post
Share on other sites
2 hours ago, Acidmank said:

While i havent confirmed this works it sounds like an awesome tool.  Congrats !!!

Perhaps bundle in Pictures of the main board versions and the points that need to be bridged?    

Also add to the readme  what size bios for what mainboard??

Im thinking that there might be a lot of questions about this so try head them off before the flood?

Thanks but mainly it isn't to much of my work. The exploids are well known and Rocky5 uses them for his softmod tool as well so credits here belong to the guys who found them and make them usable.

I have just replaced some things behind that and boot an EvoX instead of UnleashX (like in the softmodding tool for example). And in EvoX you see which bios is for which console but, I will add that to the read me as well since it could have use for users. So thanks for that.

For now... 

All bioses are EvoX m8+ noDVD F+G bioses (like I wrote above). F only or yesDVD dosn't make any seens so, yea.  I choose to add those and make sure they work (I have used the bios from Dave if someone wonder/ask/cares). I have removed the Animation and TM logo and made them nice blue so nothing to fancey. And they are EEC bioses which boots E:\Dash\UnleashX\unleashx.xbe first and C:\evoxdash.xbe last.

  1. The 256kb.bin is a for versions 1.2 up to 1.4/5. 
  2. The 1024kb.bin is for XBox 1.0 / 1.1.
  3. The bios.bin (256kb) is for Winbond TSOP's.

All exploids are on it for : Splinter Cell, 007 Agent Under Fire, Tony Hawk 4 or MechAsault in PAL and NTSC.

 

Edit. About the Pictures. I will think about that but a quick google search delivers all you need but we will see. Maybe I do a little PDF and include that.

Edited by sweetdarkdestiny
Link to post
Share on other sites

So here we go .... Now with folder links for further updates (if needed).

Changlog :

  1. Added a PDF with screens for all TSOP's.
  2. Added  explanations about the used bios files.
  3. Added one iND 5003.67 bios as 256kb for XBox v1.2-1.5.

OGXBox 2021 MC TSOP Flasher Pal+NTSC v1.0.1

Folder Link for 1fichier : https://1fichier.com/dir/9s5fFFmH
Folder Link for Mega : https://mega.nz/folder/0AcHWAgL#XdxlJpsB98p6jAISXBHB2A


MD5 of the rar archive: 2e752de11e464d85abf115bb49e1695f

  • Thanks 2
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Haizum74
      Well, I softmodded then tsopped and tried flashing a winbond bios Evox 8 which was all going well until it turned off after flashing then wouldn't turn back on except doing the triple on then off crap. 


      Assuming I have done it right and it was a bad flash?  What now? 
    • By Haizum74
      Are there any issues/conflicts I need to be aware of when tsoping my xbox? Ive been running a soft mod for a week or so and have a sata 500gb HDD locked with apps, games and of course a dash, XBMC4gamers.

      If so I can always put the original HDD in to tsop it that way but then am I good to go with putting the 500gb back and just straight booting? OR, do I need to reinstall everything?


      Any specific bios reccomendations? I will be using the drive as well as the HDD and on 1.4 I think. Certainly not 1.6
    • By benis
      I've been struggling recently with getting a dashboard on my recently flashed Xbox, and I'm not very sure where to go. I softmodded it with Rocky5 first, then I flashed it with iND-BiOS with no issues, but since it can't find any dashboard, it just goes black after the startup animation. I tried using two different burned copies of Hexen 2018; one either isn't recognized or flashes red-orange-green, and the other isn't recognized at all. Both discs were burned at 4x with PowerISO on Verbatim DVD-Rs, and the drive was able to boot a burned copy of Outrun 2006 and can play retail games, albeit with some difficulty. I was planning on installing a 1TB SATA HDD, and the only option I can think of is putting a dash on it via XboxHDMUSB and then putting it in, but I can't find any guides for this specific method and I don't have enough experience to really know what I'm doing when it comes to building HDDs. What can I do in this situation?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.