eightbit Posted December 3, 2020 Report Share Posted December 3, 2020 Great, thanks for looking into this! Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 3, 2020 Author Report Share Posted December 3, 2020 (edited) It's done. I have removed raincoat and replaced it with Resctoox for both, Sharp and Winbond TSOP's. Now you can flash bot Winbond and Sharp TSOP's right away from the UnleashX installer with a decent amount of bios files you can choose of (If someone is still missing a bios, let me now and I will add it). And btw. if you like to change the bios of your Winbond (or Sharp) again you can do that now from your dashboard, after the first flash from DVD. You just have to place your bios in "C:\Bios\" and launch Resctoox from E:\Apps\Resctoox. Or if you already have a bios in "C:\Bios\" but no Resctoox installed, you can launch it from the installer (Launch pure Resctoox) and you can flash your bios also right a way. So thanks again for the bug report. Below the folder links for the downloads. PS. Let me know what you think. (Here or PM, what ever you prefere.) ******************************************************************************** *************************** OGXBox Installer 2021 *************************** ********************************************************************************Version 1.0.4. Fixed: The menu 3.7.2. Launch Micro EvoX to lock undlock and backup the eeprom. Fixed: some typos I found. And yeah, I think there are planty more of them but they are features! Fixed: The Winbond Flasher. (Huge thanks to: eightbit for reporting this!) I kicked raincoat + EvoX combination. Now you can flash strait from UX with Resctoox. Changed: Sharp from raincoat to Resctoox for the same reason (bug) as Winbond above. Added: A second option for the "3.5. Back to Factory" option. One for F and one for FG users.OGXBox Installer 2021 UX PBL v1.0.4 Folder link @ 1fichier : https://1fichier.com/dir/mX1kipIz Folder link @ Mega : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX v1.0.4 Folder link @ 1fichier : https://1fichier.com/dir/mX1kipIz Folder link @ Mega : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g Edited December 3, 2020 by sweetdarkdestiny 1 Quote Link to comment Share on other sites More sharing options...
eightbit Posted December 3, 2020 Report Share Posted December 3, 2020 I will say that this installer is FANTASTIC! The flashing works find now on the Winbond chip. Just make sure that you have a hard drive set up first I had a brainfart and was setting up a brand new 500GB drive but tried to TSOP flash before setting it up. Duh...it needs to copy the files to a set up drive of course Anyhow, this is the only disc anybody would ever need in my opinion. All copies of Hexen and other stuff I have are getting tossed. This is certainly the most comprehensive installer disc for the xbox I have ever seen. Bravo, really, on a job WELL done! 1 Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 3, 2020 Author Report Share Posted December 3, 2020 1 hour ago, eightbit said: I will say that this installer is FANTASTIC! The flashing works find now on the Winbond chip. Just make sure that you have a hard drive set up first I had a brainfart and was setting up a brand new 500GB drive but tried to TSOP flash before setting it up. Duh...it needs to copy the files to a set up drive of course Anyhow, this is the only disc anybody would ever need in my opinion. All copies of Hexen and other stuff I have are getting tossed. This is certainly the most comprehensive installer disc for the xbox I have ever seen. Bravo, really, on a job WELL done! Hmmm.... I will think about an option for a basic bios which can be flashed straid from the DVD to prevent this (Basicly the option is already there, you just need to start Resctooxbut i need to put the right bios in place for that job). I think an EvoX m8+ mutli bios would be nice for that. I will put that on the to do list. About the rest, you make me blush (Can i say that as a man? Sounds stupid dosn't it?) How ever, you get the point. Like I already wrote, I try to lissen to ppl. and try do to what they want or to add what they need or wish for and what I think is useful or at least a nice to have. We will see how this all turns out. But thanks for this nice words. Quote Link to comment Share on other sites More sharing options...
nin1 Posted December 3, 2020 Report Share Posted December 3, 2020 So I installed a new 80 GB Ide harddrive, all capacitors look in good condition , will try this soon. Quote Link to comment Share on other sites More sharing options...
eightbit Posted December 3, 2020 Report Share Posted December 3, 2020 (edited) Hey, credit deserved where credit is due. I tested each install option in each category to see if I can find any other issues. Nope. This is rock solid. Finally a great one DVD solution that covers everything one could want/need to get their original soft or hardmodded xbox to speed. I know how much work can be involved with these things. I go by the handle "zektor" elsewhere (GBATemp and others) and I wrote a few tools to do things on the Wii (a safe firmware upgrader at the time), released things for the Gizmondo (a custom launcher, games) and a bunch of other stuff here and there over the years. It is really a labor of love and I don't think a lot of people appreciate that. Most just download stuff and use it without the thought of the work involved that someone put in for free so that everyone can benefit. Just wanted to say that I do appreciate it EDIT: Actually I found ZSnexbox fails install. Everything else looks good so far. Edited December 3, 2020 by eightbit 1 Quote Link to comment Share on other sites More sharing options...
nin1 Posted December 4, 2020 Report Share Posted December 4, 2020 Any fix for the snes install? Doesnt work. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 4, 2020 Author Report Share Posted December 4, 2020 There are 7 SNES emulators on the DVD so which one you mean (They have numbers to make things easyer) In case it's it's " 6.2.4.13. ZsnexBox v3.7" (which eightbit has already reportet above your post) that will be fixed in the next build. If you want to install it, boot you dashboard and put the DVD in your drive. Then search the emulator folder for it and copy the file to your PC, extract it and FTP it back to your XBox to the "EmuS" folder. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 5, 2020 Author Report Share Posted December 5, 2020 ******************************************************************************** **************************** OGXBox Installer 2021 *************************** ********************************************************************************Version 1.0.5. Fixed: ZSnexbox which failed to install. Now it will installs just fine. (Again, thanks to: eightbit for reporting this.) Fixed & Changed: Launch problem with "Xblast" from the live apps menu. (Again, thanks to Dave who has reportet this.) Changed: The path to load the XBlast config in the xbe to "D:\". But if you guys edit something it will still save in "C:\XBlast\XBlast.cfg". (Sadly no DVD burner in the XBox. ) How ever, I think that has the most use. Added/Changed: I outsourced the hole Flash process for Winbond and Sharp TSOP's to speed up the boot process a little more. You may ask: "Why?". There are not that much ppl with Sharps (at all) and Winbonds are also not the most common ones.And because, you flash with Resotoox it needs some lines of code to work. All these lines slow down the main boot process. And to prevent that we end up like HeXEn, I decided make a own config for both Winbond/Sharp and launch it as a different "app". So all users benefit from that little change. We all get slightly faster loading times and Winbond/Sharp users get also more bioses to choose from. And be honest, even you have a Winbond/Sharp you didn't flash the TSOP each time you boot this DVD. So we have a nice Win²/Win here. I realy like how that turned out. But see you self. OGXBox Installer 2021 UX PBL v1.0.5 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX v1.0.5 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g 2 Quote Link to comment Share on other sites More sharing options...
gehx Posted December 5, 2020 Report Share Posted December 5, 2020 this installer is really good, thanks for making this! The only 'issue' that i've found is network is set to static '0.1'..can you make it DHCP? Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 5, 2020 Author Report Share Posted December 5, 2020 5 minutes ago, gehx said: this installer is really good, thanks for making this! The only 'issue' that i've found is network is set to static '0.1'..can you make it DHCP? This is the new installer Heimdall use. :D *Just kidding - I think.* About the DHCP. I can change that in the next build to DHCP. And tomorrow I can post a DHCP version of the 1.0.5 PBL version of this installer. I would say, check back tomorrow at the same time like today (Here is almost 8 pm). Bit lazy right now so yea, tomorrow. ;) 1 Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 5, 2020 Author Report Share Posted December 5, 2020 Check the 1fichier folder ( https://1fichier.com/dir/mX1kipIz ) in about ~30 minuntes (I'm uploading it right now). The DHCP build will be online as " OGXBox Installer 2021 UX PBL v1.0.5 DHCP.rar ". 3 Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 9, 2020 Author Report Share Posted December 9, 2020 (edited) ******************************************************************************************* ********************************* OGXBox Installer 2021 ******************************** ******************************************************************************************* Version 1.0.6.Added : An simple option to switch the dashboard in the installer "7.2. Switch Default Dashboard". You will need a CEE Bios to make use of it. And before you flash the CEE bios make sure you have already set your default dasboard! This is only needed onece when you switch the Bios. After that you can switch as many times you like. A Shortcut will be placed on "C:\" as "evoxdash.xbe" which loads your prefred dashboard from E:\Dash\DashName\DashName.xbe. If you like you can crate your shortcuts and place them in the shortuts folder. And it's needs to be added to the config but thats C&P (and name change). So everyone can to this. To create shortcuts simply use Xbe Shortcut Maker. Added : A mini EvoX as some sort of mini bootloader. So when you boot up your XBox a slim EvoX will launch and it will give you the option to choose which dashboard you like to start. Needs a CEE bios as well! Just a funny so needless gimmik. Added : More words of warnings in the bios section of this installer.Added : An option to restore you C backup to c (3.11).Added : The XBMC Origins skin and XBMC Origins Skin Mod. Changed : For all versions, I changed Static IP to DHCP. In case someone want an Static IP version and can't do it on his own, let me know and i provide you one.Fixed : A row in the dashboard info which was twice there. So just aesthetics.Fixed : I forgot to copy the Chimp2618 LinuxBoot.cfg from E:\Apps\Chimp2618 to e:\(root) which is now fixed. Sorry for that. (Stupid n00b mistake) Update : Updated the UnleashX config.ini of the UnleashX dashboard which get's installed by default. New is: - DHCP instead of Static IP. - Now it's possible to switch your default dashboard in UleashX without the need to launch the Installer DVD (Make sure you use a CEE bios and that you have the dashboard you want to switch to is already installed). You will find the option in "Dashboard and Skins" Again, CEE only.Update : Updated the EvoX.ini of the EvolutionX dashboard which will be installed as default. Since it's still a nice fast dashboard which I use from time to time as well, I though it's nice to update the ini. All basic apps are hardcoded like in unleash (but you have the option to scan for unlisted apps). I also changed some things which didn't work because EvoX is just to limeted in his functions. Update : Updates for some of the emulators: XBMC-Emustation Xboyadvance Vice64X Atari7800x Neogenesis NeoPopX Added : Some new Emulators: Z26x Emulator. Winuaex Lite NestopiaX AdamX Blissx Bluemsxbox MekaX Wonderswanx Finaly I have have made a new "OGXBox Installer 2021 UX Light" version. This will come, as PBL and as nonPBL. If you don't need any gimmik, the nonPBL light version is the way to go (I still prefere the PBL one but hey, who cares.). There are no emulators (Only XBMC Emustation is stille on there.). All alternative apps has been removed so there will be just the most used (recommended) ones still left. Retail 2 Debug and xDSL has been removed in these light versions. I also have removed all old and beta dashboards. Now there are only EvoX, UX, XBMC and X4G which all gets installed in one run. And I made slightly changes to to apps install which means all (left over) apps will be installed in onece when setting up a new HDD. That makes the install process a bit longer before XBP starts but you will save that time later. And there is also an "Pro" version I have made, mainly to see how much I can strip down eveything without losing any functionality. So there are only 455 lines of code left in this version. TruHeXEn 2020 has 2988 lines of code and the default OGXBox installer has 1534 lines. This version will do 100% the same as the others. But it will also frag your XBox in no time if you don't know what you do because, this version has no warnings, no explanations no nothing. So you need to know what things do. In case you press somewhere wrong because you didn't understand what "XXX" does you're screwed. And you would blame me (which I don't want) because of the leak of knowledge (No offence). So this is for Pro's only and it's only for testing purposes (Even it works great!) So if you understand that, drop me an PM and I provide you a download link right away at your OWN RISK! OGXBox Installer 2021 UX PBL DHCP (PBL = Phoenix Bios Loader) Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX PBL DHCP Light (NEW) (PBL = Phoenix Bios Loader) Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX DHCP Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX DHCP Light (NEW) Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4gOGXBox Installer 2021 UX v1.0.6 Light Professional DHCP (NEW)Link on request only (See above). Edited December 9, 2020 by sweetdarkdestiny 1 Quote Link to comment Share on other sites More sharing options...
nin1 Posted December 9, 2020 Report Share Posted December 9, 2020 When I put in the CD on a brand new harddrive it says unleash... Do you want to prepare the new hd. f, g drive etc.. Press yes on everything? Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 9, 2020 Author Report Share Posted December 9, 2020 If you wanna prepare your HDD sure, why not? It just writes the partions table and a quick format. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 11, 2020 Author Report Share Posted December 11, 2020 Hey guys, sadly I have made an real big mistake. I have forgotten to delete 2 files which causes an error 21 when launching the MS Dashboard. The fix for that is very simple: Launch your file explorer. Navigate to C:\fonts Delete " bert.xtf " and " ernie.xtf ". Reboot. Launch the MS Dashboard. Huge thanks goes to eightbit who has reportet this. So till the nex version comes up (with real big changes which need some time) you know how to fix my fault. I'm realy sorry for that! * Shame on me. * Quote Link to comment Share on other sites More sharing options...
eightbit Posted December 11, 2020 Report Share Posted December 11, 2020 Super easy fix. Took all but 10 seconds to fix. Thanks! Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 20, 2020 Author Report Share Posted December 20, 2020 Yeah, it took wile and many burned test disc are gone down the drain but it's done - Finaly. Now only 2 versions are left. You can choose between a Static and DHCP because, some prefere the one over the other so make your pick which you like more. I have cut out the emulators and put them on a standalone installer. I also have made a "Game DLC; Game Update, Game Wide Fix, Game HDD Fixes DVD". Basicly it was just for me but hey, why not share it it right? And I'm working a new build for that which includes Game Saves as well but that will take a wile because of the mass of save games (1000 + - X). I thought, it is nice to have all those on one DVD (Fixes, updates ect.). Not eveyone needs or want them so load the extras in case you like to have them. And I talked about a manual which is dropped. I Now use the build in texteditor of unleash to provide all infos needed (Way better as infoboxes and you can provide way more infos in that, make sure you check them out - if needed). The 1fichier links are hotlinks which meens no waiting time ect (Happy XMas), just click and load. For the Mega links you have the usual 5gb in 6H quota. The two extras disc are normal links. So what's left to say? Right, Happy XMas and a Happy new year (hopefully without that covid shit). Stay healthy guys. ******************************************************************************************* ********************************* OGXBox Installer 2021 ******************************** ******************************************************************************************* Version 1.1.6. Changelog: Almost eveything has changed. Realy eveything? Nope, I still didn't use a password for anything (so thats old, blame me for that). But: Less code, less bugs, more speed, more options, more gray hairs and more fun. OGXBox Installer 2021 - DHCP Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g OGXBox Installer 2021 Static Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g Extra Installer : OGXBox 2021 Emulators Extras v1.0.0 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g OGXBox 2021 Game Extras Wide+HDD Fixes+DLC+Updates v1.0.0 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g 1 1 Quote Link to comment Share on other sites More sharing options...
Raja Posted December 20, 2020 Report Share Posted December 20, 2020 (edited) I tried this on a Winbond TSOP, flashed the EVOX no DVD Bios as all of them are NO Dvd bioses. Xbox freezes a at Blue boot logo and flashes red error 7. If I unhook the the DVD IDE cable it boots fine. Can not cold boot a Disc either. So I had to FTP regular Bios and use xblast to flash via dashboard. So is it possible to include a regular EVOX bios in the future revisions? And thank you so much sweetdarkdestiny and the Beta Testers, for all your hardwork you put in this Installer!! Edited December 20, 2020 by Raja Thanks Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 21, 2020 Author Report Share Posted December 21, 2020 (edited) I have testet all evox bioses. No cold boot bug here. And what app you has used to flash your Winbond (2.3. Flash Winbond or Sharp TSOP (Resctoox)) ? Do you have an SATA Hdd with 80 wire cable? WD Blue HDD? And it would be nice to now what dash you use and which bios you has flashed since they are all different even they are all EvoX m8 Btw. Error 7 meens HDD took to long to become ready. This is how the bios files are configured : https://imgur.com/a/fdYDQq8 The only difference is the boot order of the dashboards and ofc. sometimes the size. Edited December 21, 2020 by sweetdarkdestiny Quote Link to comment Share on other sites More sharing options...
Raja Posted December 21, 2020 Report Share Posted December 21, 2020 43 minutes ago, sweetdarkdestiny said: I have testet all evox bioses. No cold boot bug here. And what app you has used to flash your Winbond (2.3. Flash Winbond or Sharp TSOP (Resctoox)) ? Do you have an SATA Hdd with 80 wire cable? WD Blue HDD? And it would be nice to now what dash you use and which bios you has flashed since they are all different even they are all EvoX m8 Btw. Error 7 meens HDD took to long to become ready. This is how the bios files are configured : https://imgur.com/a/fdYDQq8 The only difference is the boot order of the dashboards and ofc. sometimes the size. I used 2.3. Flash Winbond or Sharp TSOP, I tested it on the 2TB origins Hard drive which uses XBMC. Yes I have a SATA Hard Drive and 80 Wire Cable WD Green HD. It boots fine as long as the IDE cable is unhooked from the DVD Drive, as soon I connect the IDE Cable to DVD Drive it Freezes on X logo and flashes Red. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 21, 2020 Author Report Share Posted December 21, 2020 Origins..... For that you need a CEE bios as far as I know (I will test it later, I have the Origins Image on one HDD. And the bios files are made for this installer and it's configs. So you would need to flash " 2.1.2. Flash EvoX m8+ F+G CEE noDVD (256kb). " As far as I know it will boot "C:\evoxdash.xbe" so that bios should work for you. I will take a look a bit later and report back. And ofc. I will add a full stock Bios to Resctoox even it also boots "C:\evoxdash.xbe" like the CEE (2.1.2). If you have flashed the EEC XBMC bios it searches in the wrong place since it's made to search for "E:\XBMC\Default.xbe" for the XBMC from this installer. I will quick hook up the Origins HDD to my pc to take a look and, like I wrote, will test it later the day. ;) Quote Link to comment Share on other sites More sharing options...
Raja Posted December 21, 2020 Report Share Posted December 21, 2020 6 minutes ago, sweetdarkdestiny said: Origins..... For that you need a CEE bios as far as I know (I will test it later, I have the Origins Image on one HDD. And the bios files are made for this installer and it's configs. So you would need to flash " 2.1.2. Flash EvoX m8+ F+G CEE noDVD (256kb). " As far as I know it will boot "C:\evoxdash.xbe" so that bios should work for you. I will take a look a bit later and report back. And ofc. I will add a full stock Bios to Resctoox even it also boots "C:\evoxdash.xbe" like the CEE (2.1.2). If you have flashed the EEC XBMC bios it searches in the wrong place since it's made to search for "E:\XBMC\Default.xbe" for the XBMC from this installer. I will quick hook up the Origins HDD to my pc to take a look and, like I wrote, will test it later the day. Thank you Dear Friend no rush. Enjoy the holidays first, Merry Christmas and a Happy New Year!!! Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 21, 2020 Author Report Share Posted December 21, 2020 A quick look showed me that you need the CEE (2.1.2) Bios. Origins will boot "C:\evoxdash.xbe". And on E of the Origins image is a "evoxdash.xbe" as well which would boot with a EEC but that xbe is a Unleash dashboard and there is also a "items.xml" present which can causes problems in my experience (Stock at boot logo, as you described). How ever, the CEE (2.1.2) should boot the Origins image. I will try that later the day to confirm that and post the results here. And Merry Christmas & a Happy New Year for you too. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 21, 2020 Author Report Share Posted December 21, 2020 (edited) Because I'm damn nosy I have tested it. And can confirm that the CEE bios boot origins without problems. Screen : https://imgur.com/a/RTSt2Cj Edit: And a cold boot of the installer works as well. Edit 2: I will make a note in the info file that the "Origins image" needs a CEE. Edited December 21, 2020 by sweetdarkdestiny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.