Hey guys, Wyverino here
I am fairly new to the xbox modding scene. My gf just gifted me an old premodded 1.1 for christmas and I love it so far. I just want to tweak it a little more to make it my hopefully favorite console!
Wish all of you guys a happy new year!
I've recently decided to get back into the Xbox scene again after quite a few years. I'd seen that the OpenXenium modchip was one of the easiest and most up to date chips so I bought one to fit into my 1.6 crystal. I decided on using an LPC board instead of choosing a wired install but I found it really clunky, and was having trouble getting it to boot. I decided, after numerous attempts to get things running, to remove the board and wire up instead.
I have checked the joints and checked the board for spatter, removing what I can as and when I come across it. I'm now sitting without any modchip, checking to see if it works as stock again, only to be greeted with a frag. No matter what I've done from here has been the same result
Could any of you direct me here and let me know of any possible fix. I've taken pictures of the board. Please let me know if you need any more info. I had to upload them to some image uoad site as the files were too large, so here they are as URLs below. Thanks
My OG XBOX is a version 1.4 and has been TSOP modded and is running INDBIOS 5003 with F & G support. I am using Rocky5's ISO BIOS patcher as the first thing that runs at bootup (DASH1 in IND0BIOS.CFG) to get ISO loading working and that is fine (I used to run UnleashX and needed it, not sure I still need it with XBMC4Gamers but assumed so since I'm using INDBIOS 5003). I assembled the patcher.xbe (named it "XISO Loader.xbe") with it pointing to the dashloader.xbe at C:\DashLoader (renamed from C:\evoxdash.xbe) which, in turn, defaults to my XBMC4Gamers default.xbe at E:\XBMC4Gamers\ directory. I edited the "A" .cfg that resides within the C:\dashloader directory to point to the Enigmah PAL/NTSC app in my E:\Apps\ directory in case I want to switch video modes. All of that works great. I can boot to XBMC4Gamers by default or hold "A" and get to the Enigmah video switcher to select PAL or NTSC. Fantastic stuff! But, now, I am trying to get the dashloader configurator GUI to work for configuring the dashloader button settings and I can't get it to work. I installed the dashboard configurator from the URLDowloader within XBMC4Gamers into my E:\Apps\ directory and that seems to work fine as I am able to run the configurator which loads the settings from somewhere and will save settings somewhere BUT it does NOT really impact the A,B,X,Y, etc. .cfg files within the C:\cashloader\ directory. What am I missing?
Thanks in advance for any assistance.
Board Life Status
Board startup date: April 23, 2017 12:45:48