Jump to content
OGXbox.com

WTB 1.2 - 1.5 Motherboard


jdub01984
 Share

Recommended Posts

Pulled my og xbox out of storage, used it for a few weeks and then packed up and moved. Now when I plug it in and turn it on, I get the Christmas lights. Would like to replace the motherboard with a 1.2 - 1.5 model so I can use the same power supply I already have. I have an openxenium coming so don't need any of the drives. Thanks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By jeffl
      Xbox takes about ten minutes to load the dashboard if I do not attach the DVD drive. I have more xboxes than I do working DVD drives so my goal is to build a working xbox that doesn't require the DVD drive.
       
      My issue seems to match a previous post.
       
      I used TruHexen 2021 to write 256K EvoX NoDVD to TSOP. From the previous thread, I see that KaosEngineer recommended using EvTool to customize the BIOS before flashing. I grabbed EvolutionX M8plus Bios.rar from xbins. I am paranoid about bricking my xbox. Before I flash, I wanted to make sure I am flashing the correct BIOS.
       
      Within the archive, I see a M8plus.bin file which I believe is the correct one to use for 1.2. The MD5 is 0xdfc6288f6b67fd021e1970491c64c0a0. This MD5 doesn't match the Evox M8 MD5 listed at https://www.reddit.com/r/originalxbox/wiki/bios/md5 of aa4d0820b932009090f780f0ee1d1b1c.
       
      Do I have the correct Evox M8plus BIOS for my 1.2?
       
    • By mandalore30
      Hi I recently got a non working crystal xbox(1.6) for cheap, I already have a tsop 1.4 and was wondering if I can put all it's components(mobo,psu, dvd etc) into the crystal case. 
    • By Edge
      Hi Everyone!
      I'm in the market for a 1.0 motherboard that has had the extra ram up to 128mb chips added, has had all the caps replaced, the clock cap removed, the TSOP write points restored, and CPU thermal paste replaced. Essentially a nicely restored 128mb 1.0 motherboard that won't give me any trouble for!
      Optionally it would be nice to have the LPC pin headers installed in the case recovery is needed.
      I know there is a lot of time in that request between the caps and the ram, so please name your price. I'm in the US.
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.