Jump to content
OGXbox.com

Report

  • Similar Content

    • By iVirtualZero
      Hi i have a Xbox 1.0 with a corrupt bios and i discovered that the TSOP mod wasn’t done before i flashed it and ended up corrupting the bios. I tried the 3 wire trick and that didn’t work and can’t seem to find any bios reflash settings on the Open Xenium mod chip. So that really only leaves me with flashing a new chip and soldering it in. Is that the only option i have?  
    • By iVirtualZero
      I am disappointed with the fan mods for the Original Xbox. I tried a 60mm Noctua Fan and then an 80MM Noctua, but no matter what i do. I cannot increase the speed of the fan. The fan just stays at the same speed settings even during gameplay. And was wondering if i can increase the speed of the Noctua since they are better,quieter fans capable of pushing out more air. I tried increasing the speed through the settings and through the config settings. But it still doesn’t make a difference. My Xbox has an Open Xenium modchip with Unleash X. Did i miss something? Do i need a special adapter? 

    • By 4PlayCoOp
      Ok I admit I am not a pro modder. Really only started learning stuff.
      I purchased an already modded OG xbox. Works great but i really wanted to use a wheel and arcade joysticks with soo many games. Found the OGx360 device and bought the 4 controller capable one.
      Plugged it in with a usb 4 port hub into the ogx360 and viola i had: an xbox 360 corded controller, a race wheel with pedals, and an arcade joystick 2 player board. I was able to turn off which controller i didnt need using the hub. Was soo happy!
      It worked for about a day... Some reason the controllers all stopped being seen by the xbox. Troubleshooting Tried just 360 corded controller plugged into the ogx360 and it blinks one time does not show the lit up for player number. Which it did do before.
      Tried switching which micro usb goes where but no effect. An Og xbox controller works so ports on xbox are good. And 360 controller works on a PC or 360 still. Same with wheel and arcade joysticks. So just the Ogx360 is fried?
      Reached out to seller and got replacement. Yay!
      But it worked again for about 2 days....
      Now i see most people seem to just use a wireless adapter in the ogx360. 
      Is using the 4 port usb hub what is causing my ogx360 to like short out?
      The devices i want to use are all corded so i dont need the wireless function just multiple USB.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.