Jump to content

XBox Psu 1.1 To 1.6 Help


Recommended Posts

Hello everyone, my name is Vitalij and I am from latvia ! 
I have two xbox v1.1 and v1.6  in 1.1 dump of something (red-green light), but fully working power supply and 1.6 working, but the mosfet burned out in the power supply.
Is it possible to make a 1.1 to 1.6 PSU, can there be a complete manual or something? I found a guide showing how to make from 1.1 to 1.2-1.5, but as I understand it, this does not work for me.
Could you please help with this?

Then I saw the topic

jS508WwwbDY.jpg

QToa7zVaj8I.jpg

YPHkIIjqQ38.jpg

-z0JyaXlgU4.jpg

Link to post
Share on other sites

No you cannot make a version 1.6 supply work on a version 1.0-1.5 as the standby voltages are different.

You can make a 1.0-1.1 supply work on a 1.2-1.4 and the other way around 1.4-1.2 to 1.1-.1.0

 

On the Version 1.6 check the caps neer the power connector and CPU heatsink.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Link to post
Share on other sites
2 minutes ago, SS_Dave said:

No you cannot make a version 1.6 supply work on a version 1.0-1.5 as the standby voltages are different.

You can make a 1.0-1.1 supply work on a 1.2-1.4 and the other way around 1.4-1.2 to 1.1-.1.0

 

On the Version 1.6 check the caps neer the power connector and CPU heatsink.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Sorry but the 1.1v power supply is working fine, I want to connect it to the 1.6v board

Link to post
Share on other sites
37 minutes ago, Wingman said:

Sorry but the 1.1v power supply is working fine, I want to connect it to the 1.6v board

No as the stand by voltage is not the same.

A version 1.6 needs a version 1.6 PSU

The 1.6 has a 5 volt standby supply and the other versions have a 3 volt standby.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to post
Share on other sites
1 hour ago, SS_Dave said:

No as the stand by voltage is not the same.

A version 1.6 needs a version 1.6 PSU

The 1.6 has a 5 volt standby supply and the other versions have a 3 volt standby.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Ok, ty 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By snoWoman
      I am looking for a VPN with port forwarding feature for my xbox if anyone of you guide me, is it possible with a VPN, since I found PureVPN is offering this as addon for free with one year plan and 88% discount on 5 years plan as part of their cyber Monday deal.
    • By Nier
      Which Xbox dvd drive uses top-60 laser? I found a lot of eBay and Ali express listings for the top-60 laser but without specifying which disc drive is compatible. 
       
      What are your experiences buying refurb/new optical lasers for the Xbox?
    • By streetguru
      Found the pin out
      https://www.ogxbox.com/forums/index.php?/topic/24-xbox-power-supply-pinouts/
       
      So I need to bridge white to black, think it's a 1.6v

      But do I also need to bridge blue to black to keep it powered on? It's going to power one fan for a 3D printer using the molex connector

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.