I have a 1.0 with 128mb installed that is TSOP'd that without any of my own intervention started to frag (green light off, green light off, red green flashing). The only even prior was transferring games overnight via FTP. I'm not sure if something overheated or what but the xbox had frozen during the transfer and upon rebooting is when the frag started. I'd love some advice on how best to troubleshoot the issue.
I installed a xblast lite to see if it was a TSOP issue and the outcome is still the same. Any ideas on what I should try next? I'm not noticing any caps that look out of sorts.
I have what seems to be a fully working Xecuter 2.6CE in a Revsion 1.6. XBMC4GAMERS and games are working, but I can't seem to find anywhere in settings where it shows the bios version or that it even recognizes the Xecuter 2.6CE mod chip. If I hold the black or clear button on controller during boot, it just loads normal to XBMC4GAMERS. Same if I hold the power and eject button at same time on startup. I do NOT get a "Xecuter Rox My Box" logo on startup screen, but only "Microsoft". Is the "Rox My Box" only a X3 thing? I get a "Evo X" in top left corner of the same green xbox loading screen. Just curious if my bios could be a better version or if I should just leave it all as is since it is working.
If I select Bank1 or Bank2 on the switch on front of unit, both load fine and work, but seem identical. Where do I find what bios version I have? Thank you!
Board Life Status
Board startup date: April 23, 2017 12:45:48