So I bought a cheapmod from ebay to try something different on a 1.6. Soldered in the rebuild board and installed the chip, adding the one wire from the lower LFRAM via to pin 3 on the LPC header. Won't boot from chip, and on top of that, installing the chip causes the LFRAM cut I made to then have continuity thus booting the stock TSOP chip. I would think I screwed something up but I slapped my openxenium chip I have in my parts drawer and it works fine. I've been looking at diagrams for 2 days now and can't figure it out. Does Pin 4 need removed from the pin header I soldered in? I've seen some guides that say Pin 4 can't be installed for this.
Please login or register to see this attachment.
Softmod. 64mb xbox. I originally thought it was cheap component cables. Replaced, didn't work. Thought bad component connectors, switched televisions. Still didn't work.
I haven't found any pattern yet. Has this happened to anyone else? The blockiness/stuttering will start happening in a game or emulator, then keep happening even upon restart on the menu. Any tips? Thanks!
Board Life Status
Board startup date: April 23, 2017 12:45:48