So i got everything installed and i get the xbox trying to boot 3x (i can see the fan on the gpu spinning) then it flashes red/green and no more fan spinning on gpu but it sounds like my hdd is still going. No picture at any point. I had alot of issues with soldering the D0 point and if im being honest i dont know if its soldered to a proper ground or not i put it to one of the bigger square pads on the motherboard. Also when soldering the D0 point i coudnt get any solder to stay and i couldn't really even see the point anymore so i went above it to another point and scraped off some of the solder mask that was on it and soldered there instead, i was hoping that since it was on the same trace it would work the same but i doubt it works like that. This is the exact chip i used and its a version 1.0 xbox. Please login or register to see this link.