titchgamer Posted September 4, 2020 Author Report Share Posted September 4, 2020 8 minutes ago, SS_Dave said: Press the Back button to select the different folders All my builds now have XBMC4Gamers as the only Dash and I set it to auto load the user that you create. You put the 4Gamers on E: drive in place of XBMC so E:xbmc You put the Games in F:Games or G:Games Apps in E:, F:, G: Apps folder Emulators in F:, G: Emulators folder Homebrew in F:, G: Homebrew folder And XBMC4Gamers will find all you stuff Then edit the ind-bios.cfg file on the C drive to change the default dash. DASH1=\Device\Harddisk0\Partition1\xbmc\default.xbe Now you Xbox will load directly to XBMC4Gamers. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. I had a look on my c. I dont actually have a indbios config file at all. is there a default one I could copy over? I assume the config file specifies which bios/dash to load? If I power on with a tap it trys to load the normal MS dash (which obv fails) but if I hold power for 2 secs it loads the indbios and loads evo x dash. Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted September 4, 2020 Report Share Posted September 4, 2020 1 minute ago, titchgamer said: I had a look on my c. I dont actually have a indbios config file at all. is there a default one I could copy over? I assume the config file specifies which bios/dash to load? If I power on with a tap it trys to load the normal MS dash (which obv fails) but if I hold power for 2 secs it loads the indbios and loads evo x dash. You don’t need a config file for ind-bios to work just to set your preferences. Do you have a m$ dash xbe in your c partition? Post a pic of the root of your c partition. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted September 4, 2020 Report Share Posted September 4, 2020 Here is a iND config file just FTP it to C drive root directory ind-bios.cfg 8 minutes ago, titchgamer said: If I power on with a tap it trys to load the normal MS dash (which obv fails) but if I hold power for 2 secs it loads the indbios and loads evo x dash That a feature of the Modchip that was so a Xbox could use Xbox Live without getting banned I would remove the wire that is coming from the front of the Xbox an link BT on the modchip to Ground (pin 2) Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted September 4, 2020 Report Share Posted September 4, 2020 You don't need the stock MS dash any way Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
titchgamer Posted September 4, 2020 Author Report Share Posted September 4, 2020 54 minutes ago, Ging3rguy said: You don’t need a config file for ind-bios to work just to set your preferences. Do you have a m$ dash xbe in your c partition? Post a pic of the root of your c partition. Nope, Just evox. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted September 4, 2020 Report Share Posted September 4, 2020 The xboxdash.xbe is the M$ dash. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted September 4, 2020 Report Share Posted September 4, 2020 And your poor Xbox is getting confused by the iND bios not having the config file and looking at the evox.ini file. This is my C drive Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
titchgamer Posted September 5, 2020 Author Report Share Posted September 5, 2020 I copied the indbios.cfg over last night but it does not seem to make any difference to the system booting. So I have opened it up just to have a look what in in there and noted the following 3 lines: DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe DASH2=\Device\Harddisk0\Partition2\nexgen.xbe DASH3=\Device\Harddisk0\Partition2\avalaunch.xbe Obv I dont dash 2 or 3, But I was wondering if I should change dash 1 to be partition 1 instead of 2? C drive is partition 1 correct? Could I delete dash 2 and 3 to save confusion? Or maybe even set dash 2 to the default MS dash? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted September 5, 2020 Report Share Posted September 5, 2020 Partition 2 is C drive and 1 is E drive. Don't delete any drives E drive is also the game save drive. When installing XBMC or XBMC 4Gamers the normal place is E drive And I change the Dash list to DASH1=\Device\Harddisk0\Partition1\xbmc\default.xbe DASH2=\Device\Harddisk0\Partition2\evoxdash.xbe DASH3=\Device\Harddisk0\Partition2\avalaunch.xbe This way it boots direct to XBMC4Gamers and if that's not there then evoxdash which is normally a shortcut to a different dash. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.