chrisrlink Posted August 25, 2020 Report Share Posted August 25, 2020 hi so I did the following steps so far 1)softmodded my 1.0 via SC PH 2) I used rocky5's tools to null the eeprom then extract the nulled eeprom backup to my gdrive ok so now I have a sata hdd (Seagate 500GB) and a kingwin SATAtoIDE board knowing that it doesn't have a master/slave switch by best option is to use xboxhdm i have a question first is there a way to burn the iso to usb boot instead of by cd? and i want hdm2.0 that supports sata drives correct? thanks for your help Quote Link to comment Share on other sites More sharing options...
chrisrlink Posted August 25, 2020 Author Report Share Posted August 25, 2020 i'm getting an error on smartctl it will not open eeprom.bin to lock the drive Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted August 25, 2020 Report Share Posted August 25, 2020 6 hours ago, chrisrlink said: hi so I did the following steps so far 1)softmodded my 1.0 via SC PH 2) I used rocky5's tools to null the eeprom then extract the nulled eeprom backup to my gdrive ok so now I have a sata hdd (Seagate 500GB) and a kingwin SATAtoIDE board knowing that it doesn't have a master/slave switch by best option is to use xboxhdm i have a question first is there a way to burn the iso to usb boot instead of by cd? and i want hdm2.0 that supports sata drives correct? thanks for your help Hi, if you use Xboxhdm 2.3 you don’t need to burn a disk, here’s a link to a video using 2.3. https://youtu.be/y_n8kEQfgdE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.