mattison1986 Posted August 21, 2020 Report Share Posted August 21, 2020 (edited) So I just installed a Aladdin xt chip today and powered on, no audio or video. Light on chip is on and light on eject button starts green and goes to green/red flashing. I cleaned it with alcohol and still nothing. Anyone know what the issue could be. Edited August 21, 2020 by mattison1986 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 I would suggest the soldering is not up to scratch or you have a solder blob . Best to post a pic and then we can see what may be wrong. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 3 hours ago, mattison1986 said: So I just installed a Aladdin xt chip today and powered on, no audio or video. Light on chip is on and light on eject button starts green and goes to green/red flashing. I cleaned it with alcohol and still nothing. Anyone know what the issue could be. !st get rid or the red wire going to the transistor it's not needed What is the red wire under the mod chip? and I can not see D0 connection. The connections on the LPC rebuild don't look the best either Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 The long red wire is so the led on the chip powers on and off with the power button, instead of staying on continuously. The video I watched for reference was by retro pro frank, to give you a idea of what I did. Quote Link to comment Share on other sites More sharing options...
mrmonkeyman227 Posted August 21, 2020 Report Share Posted August 21, 2020 check av cable Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 I have a new one coming tomorrow. The one I'm currently using worked prior to the chip installation. And it was amazon new. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 24 minutes ago, mattison1986 said: The long red wire is so the led on the chip powers on and off with the power button, instead of staying on continuously. The video I watched for reference was by retro pro frank, to give you a idea of what I did. I think my way is a ship load neater This is how I prep all Aladdin chips for any Xbox version Cut the trace under the yellow line and add a link like the green line. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 1 hour ago, mattison1986 said: Have you resoldered the the connections on the PCB rebuild board? The to 2 pins don't even look soldered The Aladdin chip is the most reliable out the there and the only time I see problems are install or bad flash both from the owner. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 (edited) Will do. What does that one do? The link? Edited August 21, 2020 by mattison1986 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 Just now, mattison1986 said: Will do. What does that one do? The same as running a wire so the led is power on and off with the Xbox power. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 I have have not, I will resoder and place the link first thing tomorrow. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 So get rid of the long red wire all together? And yes the pins are not soldered I went based off the rebuild board he used in the video. But I will get them soldered Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 And the D0 how have you done that? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 No I have not. Suggestions on that? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 I normal cut the Lframe trace and don't worry about connecting the LFRAME to modchip like in the yellow box Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 I just put a new rebuild chip in and cut the trace. Still the same issue. I tried to run without the Aladdin xt chip and other scenarios all with the same results. It seem like it attempts to run 3x then starts flashing red and green. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 21, 2020 Author Report Share Posted August 21, 2020 Did I remove the correct pins? Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted August 21, 2020 Report Share Posted August 21, 2020 (edited) Aladdin XT installation Guide.pdf Edited August 21, 2020 by sweetdarkdestiny Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 The only pins I remove is pin 4 on a 14 pin header (12 pin non Open Xeniums) and pin 4 and 6 on a version 1.6 board. I also don't bother with the LPC port rebuild board and use to chuck them out and I have never seen any 1/2 decinet electronics maker join two PCBs that way. When the DuoX2 chip was released it came with them and I would get 1 a month to fix because of that small board. Any way that's my rant It looks like you missed one. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 21, 2020 Report Share Posted August 21, 2020 3 hours ago, sweetdarkdestiny said: Aladdin XT installation Guide.pdf 750.67 kB · 3 downloads That pic is for a 1.0 -1.4 the 1.6 he has should have pin 6(5volt) removed as well. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 23, 2020 Author Report Share Posted August 23, 2020 On 8/21/2020 at 10:23 AM, mattison1986 said: I just put a new rebuild chip in and cut the trace. Still the same issue. I tried to run without the Aladdin xt chip and other scenarios all with the same results. It seem like it attempts to run 3x then starts flashing red and green. Quote Link to comment Share on other sites More sharing options...
mattison1986 Posted August 23, 2020 Author Report Share Posted August 23, 2020 (edited) I'm pretty sure this thing fraged some during the installation. Is it true that replacing the capacitors will fix this? If so can anyone send a like for the best place to purchase. It tries to load 3x then flashes red/green. Edited August 23, 2020 by mattison1986 Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted August 23, 2020 Report Share Posted August 23, 2020 7 hours ago, mattison1986 said: I'm pretty sure this thing fraged some during the installation. Is it true that replacing the capacitors will fix this? If so can anyone send a like for the best place to purchase. It tries to load 3x then flashes red/green. Was the Xbox fragging before you started, I would have thought the frag will be to do with the lpc rebuild? You just need an electronics supplier for replacement caps, it depends where in the world you are, online there's Digikey, farnell, cpc farnell and a load more. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.