Jump to content
OGXbox.com

No Audio or Video


mattison1986
 Share

Recommended Posts

3 hours ago, mattison1986 said:

So I just installed a Aladdin xt chip today and powered on, no audio or video. Light on chip is on and light on eject button starts green and goes to green/red flashing. I cleaned it with alcohol and still nothing. Anyone know what the issue could be.

20200820_221517.jpg

!st get rid or the red wire going to the transistor it's not needed

What is the red wire under the mod chip?

and  I can not see  D0 connection.

The connections on the LPC rebuild don't look the best either

 

20200820_222032.thumb.jpg.32deb6dd1c7e73fd1c0149cc7d6f0998.jpg.b2ec2b5d883779cbebb27dab240ffac7.jpg

 

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
 

 

 

  • Like 1
Link to comment
Share on other sites

24 minutes ago, mattison1986 said:

The long red wire is so the led on the chip powers on and off with the power button, instead of staying on continuously. The video I watched for reference was by retro pro frank, to give you a idea of what I did.20200820_231037.thumb.jpg.af2d9af34b59fed8061c09de65b47dcb.jpg

I think my way is a ship load neater 

This is how I prep all Aladdin chips for any Xbox version

IMG_20200404_103218.jpg.e98d9f1a9035534dc245b75ad3bdff2f.thumb.jpg.77714f911f2b39fac85ab8ff173e371a.jpg

Cut the trace under the yellow line and add a link like the green line.

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
 

Link to comment
Share on other sites

1 hour ago, mattison1986 said:

20200820_222032.jpg

Have you resoldered the the connections on the PCB rebuild board? The to 2 pins don't even look soldered

The Aladdin chip is the most reliable out the there and the only time I see problems are install or bad flash both from the owner.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
 

Link to comment
Share on other sites

The only pins I remove is pin 4 on a 14 pin header (12 pin non Open Xeniums) and pin 4 and 6 on a version 1.6 board.

I also don't bother with the LPC port rebuild board and use to chuck them out and I have never seen any 1/2 decinet electronics maker join two PCBs that way. When the DuoX2 chip was released it came with them and I would get 1 a month to fix because of that small board.

Any way that's my rant

It looks like you missed one.

20200821_101520.thumb.jpg.688198a608416cffa315d48e770b93a2.jpg.449902b8a0dd5f8fe1b12e9cdd75e50f.jpg

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

 

Link to comment
Share on other sites

7 hours ago, mattison1986 said:

I'm pretty sure this thing fraged some during the installation. Is it true that replacing the capacitors will fix this? If so can anyone send a like for the best place to purchase. It tries to load 3x then flashes red/green. 

Was the Xbox fragging before you started, I would have thought the frag will be to do with the lpc rebuild? You just need an electronics supplier for replacement caps, it depends where in the world you are, online there's Digikey, farnell, cpc farnell and a load more.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.