ludvig82 Posted August 3, 2020 Report Share Posted August 3, 2020 I finally got the parts for internal mounting of the OGx360, but i am not sure what to do with the reciever. Anyone got good ideas for where to put it internally, and in that case, how to get to the sync button easily? Is external mount best? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted August 3, 2020 Report Share Posted August 3, 2020 This is one of mine Rear mount the USB so from the front it looks stock. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
dnfm Posted August 4, 2020 Report Share Posted August 4, 2020 I broke open the receiver case and took out the tiny circuit board, then I desoldered the USB cable, and soldered a new one to it that was just a few inches long... then I soldered a pair of wires to the 'pair' button, and connected them to a button I drilled out the back of the xbox, and then just used a piece of two-way tape to mount it to the top of the ogx360 xbox mount board I bought from tek nemesis. I don't have any photos of the receiver mounted, but it's mounted to the top of the ogx360 plastic in this photo: https://i.imgur.com/6A9PZUe.jpg 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.