Jump to content
Sign in to follow this  
Neoxavier

Ninja Boot Problem

Recommended Posts

Hey, I'm having an issue where I cannot load Ninja massive directly. I have the program files in my G drive and in any tutorial I've watched, when you go into emulators and click on ninja it loads right up, but Ive tried from XMBC, and unleash dashboards, and no go. only way for me to load is to go to file explorer and launch directly from the default.xbe. I tried to "point" to the file within XMBC, but cannot locate that particular file from there, only in file explorer. any suggestions?

 

Share this post


Link to post
Share on other sites
1 hour ago, Neoxavier said:

Hey, I'm having an issue where I cannot load Ninja massive directly. I have the program files in my G drive and in any tutorial I've watched, when you go into emulators and click on ninja it loads right up, but Ive tried from XMBC, and unleash dashboards, and no go. only way for me to load is to go to file explorer and launch directly from the default.xbe. I tried to "point" to the file within XMBC, but cannot locate that particular file from there, only in file explorer. any suggestions?

 

When you say you have the files on your g drive, do you mean you have them in a folder called ninja inside your emulators folder?

Share this post


Link to post
Share on other sites
42 minutes ago, Neoxavier said:

yessir precisely that

 

And you can see the emulator folder in unleashx and xbmc dashboards?

 

Share this post


Link to post
Share on other sites

actually I cannot see the emulator folder in unleashx or even on the E drive where the unleashx dash is located...might I have mistakenly deleted the emulator folder there?If so can I just create another 1 there or will I need my hexen disk to reload it?

Share this post


Link to post
Share on other sites
Just now, Neoxavier said:

actually I cannot see the emulator folder in unleashx or even on the E drive where the unleashx dash is located...might I have mistakenly deleted the emulator folder there?If so can I just create another 1 there or will I need my hexen disk to reload it?

Do you you have a emulator heading on your unleashx dashboard?

Share this post


Link to post
Share on other sites
1 minute ago, Neoxavier said:

no I do not just a games heading where I can access my xbox games ripped to hard drive

Well you can put ninja in your games folder for unleashx or you will need to edit the config.xml and add the Emulator heading. In xbmc you just need to set a path to the emulator folder in program.

Share this post


Link to post
Share on other sites

The config.xml is on your c partition you can either edited it on the Xbox or on a pc using notepad, just add it like the one in this photo.

Please login or register to see this attachment.

Please login or register to see this attachment.

Edited by Ging3rguy

Share this post


Link to post
Share on other sites
Just now, Neoxavier said:

well honestly editing the config file is a bit above my head lol, so I"m going to attempt to set the path in xmbc again

 

There are a couple of YouTube videos on how to do it. It’s pretty straightforward just rename the original and leave it in the c partition until you are sure the new one works. Copy and paste the apps entry and then just rename it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By Y-Stylzz
      Hello,

      I have used the official component cable for my original Xbox for years without any issues, until now. This is what happens:
      Please login or register to see this link.

      This only seems to happen on menu's. No problems in-game so far.

      At first, I thought the cable was damaged, so I bought a Kaico HDMI adapter to replace it, but this is what happens when I use it:
      Please login or register to see this link.

      I decided to grab my older Xbox from the attic for testing and both cables work perfectly on that console, so I think the cables are not the issue.

      I'm no expert at all, so can somebody tell me what's going on with my console? Can it be fixed?
    • By prtscn
      i flash custom evox bios, after that it just not boot, and switches to stock bios.
      i use raincoat to flash.
      board is 1.6 and i use evox.m8plus.v16.fc.137.bin from aid 4.5.3
      i have no idea what i do wrong.
      i then reflash it with hexen 2017 and it work OK.
    • By Nicholas Stucker
      It goes through intro and goes to profiles whereas it used to go emulator menu. I live in Missouri and can't find anyone to help. My email address is stuckernicholas@protonmail.com. I'm willing to compensate anyone that can help. It belongs to a 6yr old as I got it for him last Christmas. Any assistance would be greatly appreciated. Ty
      Please login or register to see this attachment.
      Please login or register to see this attachment.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.