JustinV Posted July 19, 2020 Report Share Posted July 19, 2020 I just got a 1.0 Xbox with an Xcecuter 2.6 chip installed. It's running Evox M8+ and I would like to switch to the bigger X2 5035.67. what is the best way to do this? Also, is there a way to determine what is on the other bank of the chip? I get an error code when I try to boot with the other bank. Can anyone give me any advice? Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted July 19, 2020 Report Share Posted July 19, 2020 Flashbios is normally on the other bank and you use it flash the 1st. If you have the evox dash you can flash using the flash menu with the bios you want to load in a folder called bios either on your c or e partition. If you have an install disk you can use that to flash the bios. If you want to flash the 2nd bank, boot up using the 1st bank then just switch to the 2nd bank before you press the flash bios on what ever method you use. Quote Link to comment Share on other sites More sharing options...
JustinV Posted July 19, 2020 Author Report Share Posted July 19, 2020 Thank you. Is there a certain way to launch flash BIOS if it is on the other bank? Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted July 19, 2020 Report Share Posted July 19, 2020 If flashbios is on the other bank it would normally show a black screen if you were using the wrong version or video output cable. What error code are you getting? Quote Link to comment Share on other sites More sharing options...
JustinV Posted July 19, 2020 Author Report Share Posted July 19, 2020 I'll let you know as soon as I can check it again. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 19, 2020 Report Share Posted July 19, 2020 If you want to have 2 different BIOS files on the X2.6 chip they both need to be flashed as one file. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 19, 2020 Report Share Posted July 19, 2020 5 hours ago, JustinV said: I just got a 1.0 Xbox with an Xcecuter 2.6 chip installed. It's running Evox M8+ and I would like to switch to the bigger X2 5035.67. what is the best way to do this? Also, is there a way to determine what is on the other bank of the chip? I get an error code when I try to boot with the other bank. Can anyone give me any advice? what's the error code you get when booting from the other bank? Quote Link to comment Share on other sites More sharing options...
DobaMuffin Posted July 20, 2020 Report Share Posted July 20, 2020 Building off of what SS_Dave said, I used X2 Bios Manager v2.3 to create my 1MB bios file to flash to my x2.6. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.