FerociousOG Posted June 26, 2020 Report Share Posted June 26, 2020 (edited) Hello all, Old friend just dug up his OG Xbox. It has an xecuter 2 mod chip. What would I need to do to use a 2TB SATA HDD besides the IDE to SATA adapter? Thanks in advance. Edited June 26, 2020 by FerociousOG Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted June 26, 2020 Report Share Posted June 26, 2020 Just a bios that will see both the f & g partitions. Quote Link to comment Share on other sites More sharing options...
ded Posted June 26, 2020 Report Share Posted June 26, 2020 34 minutes ago, Ging3rguy said: Just a bios that will see both the f & g partitions. +xboxpartioner. You need clusters of 64. Quote Link to comment Share on other sites More sharing options...
FerociousOG Posted June 26, 2020 Author Report Share Posted June 26, 2020 46 minutes ago, Ging3rguy said: Just a bios that will see both the f & g partitions. What do you mean bios? Are you saying the Bios on the xecuter 2 is upgradeable? If so where can I get that from. I believe this mod chip was installed in 2003 or 2004. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 26, 2020 Report Share Posted June 26, 2020 You will need to upgrade the BIOS as back then the BIOS will not allow a hard drive above 137 gigabyte Depending on the version of Chip and Xbox I use the X2-5035.67 and that's a 512kb or the IND-5004.67 bios and that's a 256kb size If you have a version 1.6 Xbox then use the Evox M8 plus.67 bios also a 256kb size. Have a look on a install disk under the TSOP/Modchip section. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
brogan Posted June 26, 2020 Report Share Posted June 26, 2020 Check out the second half of this video, he walks through the process of installing an new empty drive into a hardmodded xbox. And don't forget to get an 80 pin IDE cable. 1 Quote Link to comment Share on other sites More sharing options...
FerociousOG Posted June 28, 2020 Author Report Share Posted June 28, 2020 So I need to TSOP my Xbox after that I would need the mod chip? Did find this video. Let's Repair! - Revisiting & TSOP Flashing the Xecuter 3 Original Xbox (21m30s start) Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted June 28, 2020 Report Share Posted June 28, 2020 1 minute ago, FerociousOG said: So I need to TSOP my Xbox after that I would need the mod chip? Did find this video. Let's Repair! - Revisiting & TSOP Flashing the Xecuter 3 Original Xbox (21m30s start) No you don’t need a tsop as you have a modchip. You need to flash a new bios that can see all of a 2Tb hdd. You need a bios that ends .67. The .67 refers to partition 6 & 7 or F & G. If you use hexen install disk to flash the bios and choose 256Kb. You just need to know if you have a 1.0-1.4 or a 1.6 Xbox. 1 Quote Link to comment Share on other sites More sharing options...
brogan Posted August 26, 2020 Report Share Posted August 26, 2020 Great info guys, thanks for sharing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.