bulkchart32 Posted June 24, 2020 Report Share Posted June 24, 2020 i was trying out a v1.4 today. i played xmen legends 2 and had no problem. i swapped to fable and noticed that there were these faint checkerboard lines running vertical through the screen. i tried it with the modchip active and without and it was identical. could this be caused by a bad cap that is feeding the gpu? also, why did the v1.4 use 10volt caps? will 6.3volt caps work in their place? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 24, 2020 Report Share Posted June 24, 2020 As a rule you don't go down in voltage on the original caps, It could be that someone else has replaced them or the factory ran out of 6.3 volt caps What Cap number on the board are you talking about? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
bulkchart32 Posted June 24, 2020 Author Report Share Posted June 24, 2020 4 hours ago, SS_Dave said: As a rule you don't go down in voltage on the original caps, It could be that someone else has replaced them or the factory ran out of 6.3 volt caps What Cap number on the board are you talking about? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. don't really know. i'll try to take a pic later. could bad caps be causing my problem? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 24, 2020 Report Share Posted June 24, 2020 It is possible and if the caps have being changed with low quality ones that maybe the problem as well. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.