Sickk1 Posted May 24, 2020 Report Share Posted May 24, 2020 Hey guys, sold one of my chipped boxes, shipped her properly and she worked before, now we have the 3 times start and then red/orange flashing. All solderjoints were resoldered without and change in behaviour ... Any ideas ? Dead ? Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted May 24, 2020 Report Share Posted May 24, 2020 Is the box with you or the person you sold it to? Try removing the chip, try another chip, check the ide cable is connected. Are you getting an error code? Quote Link to comment Share on other sites More sharing options...
Sickk1 Posted May 24, 2020 Author Report Share Posted May 24, 2020 He sent it back. It's with me. Traces are all fine. I can try another chip for sure... No error Code. Just 3 times on/off, red/orange. Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted May 24, 2020 Report Share Posted May 24, 2020 Red/Orange is a ram error, I would get the board out and check the ram chips for any potential shorts. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted May 24, 2020 Report Share Posted May 24, 2020 Will it boot from the TSOP chip(stock BIOS)? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.