dirtykash Posted November 26, 2020 Report Share Posted November 26, 2020 (edited) Ok, so I’ve managed to get the jtag working in windows 10 and detecting a standard Aladdin modchip connected to the jtag using UrJtag, just need to build a new chip and should be good to go now. Edited November 26, 2020 by dirtykash Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted November 28, 2020 Report Share Posted November 28, 2020 On 11/25/2020 at 1:37 AM, dirtykash said: also just noticed I’m an idiot and fit the led/res in wrong spots That should not matter the resistor and LED simply tie to Vcc on one side and ground on the other in a series circuit with a current limiting resistor: Vcc ---LED---\/\/\/\--- Ground or Vcc---\/\/\/\---LED---Ground The direction the LED is installed in matters. If it does not light up, turn it around ( Anode end ---|>|--- cathode end ). The LED is a light emitting diode. It has an anode (+ positive) and a cathode (- negative) terminal. The anode needs to be connected to the more positive (higher) voltage level and the cathode to the more negative (lower) voltage level. Edit: LED Circuit Diagram - source: https://en.wikipedia.org/wiki/LED_circuit 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.