Original Wireless Controllers OgX

[KunfuMunky]

Hey guys,

I'm already googling this question for a while to see if there are some answers out there. What I am curious about is if there is some way to run original controllers wirelessly on an OG Xbox or any other console. Now I know about Ryans mod having the possibility to run a lot of different wireless controllers and I already bought this mod as well. But I was curious if it's possible to mod the controller itself to either connect the controller to Ryans mod or to make a mod like they did on the dreamcast via Dreamonn. In these times we are trying to get all the consoles running through an HDMI cable and I think the next step is to get the original controllers running wirelessly like they do with the mods from 8bitdo.

Maybe one of you guys were also thinking about a mod like this or maybe you guys have an idea

Thanks in advance!

Munky

[prtscn]

It is possible. Remove these stupid memory slots first, create cutsom 3D printed bottom part of the controller, have some sort of wireless communication so it could transfer direct USB data  to remote receiver, and receiver translate it again to original USB data form. Of course internal battery is needed.

 

[KunfuMunky]

6 hours ago, prtscn said:

It is possible. Remove these stupid memory slots first, create cutsom 3D printed bottom part of the controller, have some sort of wireless communication so it could transfer direct USB data  to remote receiver, and receiver translate it again to original USB data form. Of course internal battery is needed.

 

Yeah indeed I kinda had the same idea highlighted above. I don't think you even have to remove all ports but by altering one you could probably already have a solution also for the battery. And when using a Duke you have even more space.