Jump to content
Sign in to follow this  
webodan

XBox Will Not Turn On - Trace Corrosion Repair Might've Gone Bad

Recommended Posts

Hello,

I've got an xbox to which I've performed the trace corrosion repair on the past, as the buttons did not shut down the console properly (it only turned on after i applied power to the unit). I've ran it just with the power button working, until now, when I decided to go ahead and try to fix both buttons. But now it went bad or something, because no matter how hard I jump wires to traces A, B and D (C is fine on my board, and I can't find E) Please login or register to see this link. , the console simply refuses to turn on anymore.the wires are just fine and they give me continuity when soldered, but that's that. I know for sure that the power supply is perfectly fine (it never really failed). Even with only traces A and B soldered properly I can't get the console to boot anymore, and the right hand side of C7P8 has continunity to the solder pad in trace D (just saying because i'm not sure if this is how it should be, I hope nothing shorted :().

 

Is there any other way to wire the power to the board so it'll work again? It would be really bad to have to throw it away over something like this.... I really hope someone can help me. 

Thanks in advance.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By C64MidRezzie
      I hace a 300gb IDE hard drive that I used in a sodtmodded Xbox back in the day - only realized this evening that it is locked and that I no longer have the Xbox I made it for - is there anyway to unlock it - I have softmodded xboxes lying around - would they help
      unlock it?  Thanks
    • By C64MidRezzie
      Hi - I have a 250GB IDE hard drive with Coin Ops 8 Massive on it along with a few of my games backed up to the hard drive using dvd2xbox.  I also have a few other emulators - NES, SNES and Sega Megadrive.  This is the perfect setup for me and I don't really need to add anything else to it.  Is it possible to add the xbox origins dashboard to my current setup and if so does anyone have a link or details on how to do it?  Any help greatly appreciated.
    • By Crudelobster30
      Hi
      Im thinking about possibly selling my crystal original xbox with Xecuter 3 control panel but was wondering what it would all be worth before hand?
      It comes with:
      Xecuter Crystal Control Panel Case with original Team Xecuter LCD screen. 
      N64's 1.4ghz cpu and 128mb ram upgrade
      Version 1.0 motherboard 
      Xecuter X3 Purple Modchip
      200GB IDE hard drive
      Xecuter X3IR kit fitted so you can turn the xbox on from the dvd remote
      Blue led's installed into controller ports
       
      Good condition and fully working.
       
      So just to recap this is not for sale I'm just asking what it would all be worth?
      If this is posted in the wrong forum please feel free to move.
      The photo below only shows the xbox has 64mb ram but this was taken before I upgraded it to the new cpu and 128mb.
       
      Please login or register to see this link.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.