Jump to content

Recommended Posts

Hello,i know that i am boring with these questions but i dont know anything about og xbox softmodding.Anyways,i am trying to softmod xbox with ide to sata adapter.I tried different methods but it was just failure.Then i realized that my drive was locked.I tried 3 methods for hot swaping so far and none of those methods work.I have msi a320m-pro with amd athlon 240 ge.My xbox is 1.6 revision with 10gb segate drive ST310014ACE.I also tried using xboxhdm,burned the cd,puted it in the dvd drive,but when i went to type xbrowse it said cd couldnt be found.Xbox hdd shows in windows disk management as non initialized.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Kink43
      Hi I have installed my Aladdin xt today. I didn't expect to run into any issues as seems simple enough and I can solder small things neatly as I'm used to modifying car ECUs. 
      I think where I have an issue is the d0 wire, none of the guides actually show it connected not can I find an image online.
      The guide I've followed seems to say connect the d0 point on the board to ground. I have done this I think. Please see my picture and it causes my Xbox to not boot just flashes red light. 
      Please can someone help me with where it needs to connect to
      Please login or register to see this attachment.
    • By BaconWizard17
      Hi all! I need some help with switching out the hard drive in my XBOX. I've been battling with it for some time, so I decided to get some help.
      My XBOX version is 1.1. I currently have it softmodded with Rocky5's softmod. Originally, I had gotten a 1TB SATA drive for my XBOX (WD10EZEX-22MFCAO, which seemed like a good choice, since many other WD10EZEX drives seemed to work for others in the Please login or register to see this link. ). Along with it, I got a SATA to IDE adapter, an 80-wire IDE cable, and the molex power splitter.
      When I first attempted to configure the drive, the exposed contacts from the back of the SATA to IDE adapter (where the power connects in) touched the back of the hard drive when I was hot swapping the IDE cable. There was a spark (I didn't think to cover the connection), and since CHIMP would never load, I assumed I had fried the drive. I ordered another one, and it wouldn't work either, so I realized it was a compatibility issue.
      After this, I decided to switch to a smaller, cheaper IDE drive (Please login or register to see this link. ) that a friend said he had gotten to work before. I ordered it and attempted to configure it (using the original 40 wire IDE cable and no SATA to IDE adapter of course), and while I was able to launch CHIMP, it errors out part way through the process.
      Here's what I've been doing:
      Install CHIMP to E:/Apps, and place linuxboot.cfg into my E: drive Open the XBOX. Unplug the molex cable from the original hard drive and connect the splitter to it, one end of which I connect back to the original hard drive Place the new hard drive on top of my DVD drive (with the antistatic bag the drive came in between them) Check the mode of my new hard drive. I have tried it both with the jumper in the Cable Select Enabled position, and in Slave mode (no jumper) Launch the XBOX and wait 5 minutes for the DVD drive to go to sleep Swap the IDE cable from the DVD drive to the slave drive (within 5 seconds) Go to my applications list and launch CHIMP On the first menu button prompt, I press A to confirm that the slave drive is connected CHIMP begins to run its processes. After loading for a bit, it gets stuck on a screen saying that it can't allocate resources, with a picture of the Linux penguin in the top right I'm assuming that since CHIMP can actually boot up with this drive, that the problem might not be the drive itself, though I could be wrong (with the previous WD10EZEX drives, my XBOX would just completely freeze up when I booted CHIMP). I've tested my XBOX with just the existing hard drive installed, and that has no problems, as I'm able to play games fine and navigate through the dashboard just fine. I'm not entirely sure where my problem could be coming from, so any help would be greatly appreciated!
    • By bulkchart32
      samsung may be some of the best at reading disks but they are the worst at getting stuck trays. if changing the belt doesn't make the disk tray function correctly then what should i try next?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.