Jump to content
NeMesiS

XEniumice By Nemesis

Recommended Posts

 

667231138306a2e47761048f325d8a62342eb165

When I first thought about doing this I never expected it would come together...
None of this would have been possible without Ryzee119's work on the CPLD firmware!

For more details please visit my Main thread over at EmuXtras:
Please login or register to see this link. Please login or register to see this link.

8148401388636b701c7c3221a68b016a55b3fa09

Quick demonstration of adding bios from a USB device, dimming feature and full RGB front panel and controller ports.

NOTE: Due to poor lighting it is difficult to distinguish between some colors: "Green and Amber", "Cyan and White"...


Sales/Pre-Orders

Payments made through PayPal...

Standard Xenium Bundle: $60 AUD + Shipping      ($40 USD / €37 EUR *approx.)
Premium Xenium Bundle: $80 AUD + Shipping      ($54 USD / €49 EUR *approx.)
Massive Xenium Bundle: $100 AUD + Shipping      ($86 USD / €62 EUR *approx.)
* Prices may vary depending on international exchange rates.

For sales and general inquiries you can contact me via,

Email: XeniumMods@gmail.com
Discord: Please login or register to see this link.


Shipping

Local postage within "Australia":

Standard Postage = $8.95 AUD
Express Postage = $11.95 AUD


International shipping from "Australia" available!

Shipping to the USA\Canada:

Standard Shipping = $24.00 AUD
Express Shipping = $39.00 AUD


Known Issues

Links to Ryzee119's GitHub in regards to known issues...

Please login or register to see this link.
Please login or register to see this link.


Guides/Manuals

Below are a collection of links that I thought are still relevant for various installations,
The "Quick Solder Install Manual" is included even though I wouldn't recommend it.
Would like to create some new manuals particularly for the RGB and LPC mods...

Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.
Please login or register to see this link.


Availability

Bundle Availability:

Standalone Bundle = 16 sets
Premium Bundle = 15 sets - 2 sold
Massive Bundle = 14 sets - 4 sold


Mod-Chip Color Availability:

Blue Mod-Chip = 25 pieces - 3 sold
Black Mod-Chip = 10 pieces - 2 sold
White Mod-Chip = 10 pieces - 1 sold


Xenium Bundles

The below bundles include everything one would need for a complete installation,
A basic 30 to 40 watt soldering iron should be more than enough for the job.
The RGB controller ports require some cutting, I would really recommend a cheap
Dremel knock off from your local hardware store with a cutting wheel/blade...


Standalone Xenium Bundle

968751042b88fc9780e089beb43439c5fffd12e6

1x Xenium ClassicICE Modchip (Blue, Black or White)
1x 2x6pin Male Pin Header
2x SH 2pin 100mm "DIY" Cables
1x XeniumUSB Adapter (Blue Only)
1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only)
1x Complementary "Xenium" Sticker


Premium Xenium Bundle

59829542bb9f67a4ffdd53ad1c5834f54a9edb83

1x Xenium ClassicICE Modchip (Blue, Black or White)
1x 2x6pin Male Pin Header
2x SH 2pin 100mm "DIY" Cables
1x XeniumRGB Front Panel (Blue Only)
1x SH 10pin 300mm Cable (White Only)
1x SH 6pin to PHD 2x10pin Cable
1x XeniumUSB Adapter (Blue Only)
1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only)
1x Complementary "Xenium" Sticker


Massive Xenium Bundle

4687751420cea781c748843d2e66dff8ecc7eca0

1x Xenium ClassicICE Modchip (Blue, Black or White)
1x 2x6pin Male Pin Header
2x SH 2pin 100mm "DIY" Cables
1x XeniumRGB Front Panel (Blue Only)
1x SH 10pin 300mm Cable (White Only)
1x SH 6pin to PHD 2x10pin Cable
2x XeniumRGB Controller Ports (Blue Only)
2x SH 4pin 100mm "DIY" Cables
2x 150mm Lengths of Kynar Wire
2x XeniumUSB Adapters (Blue Only)
2x XeniumLPC, both for v1.0-1.5 and v1.6 (Green Only)
2x Complementary "Xenium" Stickers


Accessories

XeniumRGB

Is a set of modules for RGB lighting with the aim for an easy install which should look like the above demonstration. The front panel also acts as a breakout board for the RGB ports and other mods, the RGB controller port modules are design to be directly soldered to the shielding.

RGB Front Panel (Front)

87122470422e87e8841ed44bc87dd5d2374559d4

RGB Controller Ports (Pair)

97911355b56664dc7d9693bc8da8623a1d4474ba


XeniumUSB

A cable-less alternative way to convert a xbox port to USB which will be a standard inclusion with the modchip.

3899519256c0448d1ae73229f9b3d20e67166410


XeniumLPC

Are a pair of modules to aid with the installation of the modchip, also a standard inclusion.
LPC for Xbox versions 1.0-1.5 (Left), Rebuild LPC for Xbox version 1.6 (Right)

38411170988e72444eba7c036c74ee465887d423


Original Comparison

14967630f019a5be21b24712248528b82c9372bc

020904668e42e3c845e13c67e7a5de8bdba469d1

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

I'm very knew to this scene, but I can just imagine the amount of effort and work that needed to go into this. I might have to buy one of these to repair my Xbox!

 

Done an excellent job and these look just amazing 😁

Edited by Smeagolized

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By shadowfire36
      is there an alternate place to solder the d0 port than the chip ? im trying to do a hotswap to reflash my other chip
    • By Stingerrray
      Hi I recently installed and openxenium modchip chip. It is working flawlessly. I want to do two things with the Xbox. Number one I want it to play the library of Xbox games. Number to I want to make it an emulation box. Here are the problems I'm running into.
      1) when I try to install Rocky 5 XBMC emu station via FTP it locks up with just a few kilobytes left during the transfer. I have tried to build my own version and use the pre-built version.
      2) second thing is I want to replace the dash with a good dash and I'm looking for recommendations.
      3) is there any software that will rebuild a hard drive to bone stock? Or a listing of what would reside on the hard drive in a bone stock as new Manor?
       
      Thanks in Advance,
      Rob

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.