Jump to content
OGXbox.com

X3 Modchip No Flashbios


ShinGoutetsu
 Share

Recommended Posts

I've reset to default, but no difference I'm afraid. I had just reflashed the bios (to X3 3294), so thought it should already be clean (One noticable difference is that the "X3 Rox my box" splash stays on a lot longer than earlier).

Testing HeXEn 2017 and 2019, the same thing happens: After the initial blob screen with the "X3 Rox my box", screen goes to black, and then shows the UnleashX splash screen after 40 second and returns to black. It continues like this forever (I've stopped it after 12 minutes). There's 3-4 seconds of activity from the DVD-rom after each disappearance of the UnleashX splash screen.

Link to comment
Share on other sites

Yes. Green when the Xbox boots, then changes to red after 10-11 seconds after I hit the power button. At this point the Xecuter Rox my box is still visible. It the goes to black, and after 40 seconds the UnleashX splash screen appears for 2-3 seconds and then black again.

Link to comment
Share on other sites

On my Xbox with an X3 modchip booting the X3 BIOS Build 3294 with the HeXEn 2018 disc already loaded into the tray.

I see similar operations; however, I never see an UnleashX splash screen.  The console displays HeXEn's main menu.

Are you using HeXEn 2017, 2018 or TruHeXEn 2019?  (Oops you already said the versions you'd tried earlier)

 

 

Link to comment
Share on other sites

Which version Xbox do you have, and which brand is your DVD-drive?

When stating "I see similar operations", what do you mean? Is you HeXEn DVD booting fully, or are you just seeing the main menu briefly? I.e. does it work?

I've tried both HeXEn 2019 and TruHeXEn 2019, but no difference. I'm running out of ideas now.

Here's an overview of my testing: (sorry if I'm spamming)

Xbox Chip Bios Name DVD-reader Boots /Y/N) Splash screen every X second Ring light color Burned date Burn speed Action on eject Type of disc Recorder type
v1.4 Xecuter 3 X3 3294 HeXEn 2019 Samsung SDG-605 No 40 Red 26.02.2020 16x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.4 Xecuter 3 X3 3294 HeXEn 2019 Samsung SDG-605 No 40 Red 22.04.2019   Error code 21 Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 HeXEn 2017 Samsung SDG-605 No 40 Red 29.03.2018   Error code 21 Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 AID 4.6 (Brazilian) Samsung SDG-605 No 55 Green 06.04.2018   Starts Avalaunch dash Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 Slayers 3.37 full Samsung SDG-605 No 4 Amber 01.03.2020 1x Error code 21 Verbatim DVD-R ASUS BC-12B1LT
v1.4 Xecuter 3 X3 3294 Slayers 2.7 Samsung SDG-605 Yes N/A Green 06.04.2018   N/A Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 X-Wizard Autoinstaller 3.0 Samsung SDG-605 Yes N/A       N/A Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 AvaX-disk 2.5 Samsung SDG-605 Yes N/A       N/A Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 Slayers 2.6 Samsung SDG-605 Yes N/A       N/A Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 X-board Boot CD 4.0 Samsung SDG-605 No Never, always black Green     Reboots Verbatim DVD-R  
v1.4 Xecuter 3 X3 3294 Xbox Softmodding Tool Extras Disc Samsung SDG-605 No 16 Green 01.03.2020 2x Starts Avalaunch dash Verbatim DVD-R PLDS DVD+-RW DS-8A9SH
v1.4 Xecuter 3 X3 3294 Slayers 3.5 lite Samsung SDG-605 No 5 Amber 01.03.2020 4x Error code 21 Verbatim DVD-R ASUS BC-12B1LT
v1.4 Xecuter 3 X3 3294 Slayers 2.7 Samsung SDG-605 Yes N/A Green 01.03.2020 8x N/A Verbatim CD-RW ASUS BC-12B1LT
v1.4 Xecuter 3 Slayer .67 HeXEn 2019 Samsung SDG-605 No 40 Red 26.02.2020 16x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.4 Xecuter 3 EvoX M8+ .67 Slayers 3.37 full Samsung SDG-605 No 4 Amber 01.03.2020 1x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.1 Unknown modchip EvoX M8+ .67 HeXEn 2019 Philips Yes N/A Green 26.02.2020 16x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.1 Unknown modchip EvoX M8+ .67 Slayers 3.37 full Philips Yes N/A Green 01.03.2020 1x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.1 Unknown modchip EvoX M8+ .67 Slayers 3.37 full Samsung SDG-605 Yes N/A Amber 01.03.2020 1x Error code 21 TDK DVD-R ASUS BC-12B1LT
v1.1 Unknown modchip EvoX M8+ .67 HeXEn 2019 Samsung SDG-605 Yes N/A Green 26.02.2020 16x Error code 21 TDK DVD-R ASUS BC-12B1LT

 

Could it possibly be that my Xbox is flaky/defective?

Edited by drageset
Link to comment
Share on other sites

I tested a version 1.4 with X3 chip using X3_3294 bios, using a Thomson DVD, SD to IDE adaptor,Internal wii2hdmi,128mb ram, Hexen 2019 burnt on Verbatim DVD-r using a Acer DVD burner.

Same everything with a Samsung DVD Drive TruHexen,AID deluxe 4,Hexen 2017, Slayer 3.3.0, Slayer 2.7 and all disks booted 100% .

A version 1.6 with a X3 chip component video out booted Hexen 2019 ok as well.

To me if it did not load Hexen I would not lose any sleep of Hexen as Hexen has p!ssed me off with the crap it puts HDD and it changed my dash just because I installed Xblast from the install DVD and the fact that I get hammered on Facesook  if I mention that I use Slayers.

 

Cheers

SS Dave


Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

 

 

Link to comment
Share on other sites

By Similar operations during the startup process, I mean:

When powered on, the flubber animation plays, the DVD heads move to recognize the HeXEN 2018 disc that's preloaded in the DVD tray then beneath the big X logo appears:

Xecuter
Rox My Box

More data is read from the disc and the front panel Eject ring LEDs turn RED.  There's a long delay of about 40-45 seconds that I believe is the processing of the config.xml file for UnleashX. Next, the big Xbox logo with Xecuter logo below it fade to a blank screen and in a few seconds finally, HeXEn's main menu appears and options from it can be selected and executed. 

I never see an UnleashX logo appear between the fade out of the big X screen and the appearance of the menu.

Sorry, I did not make it clear what was happening in my previous post.

The burned disc I have made for HeXEn 2017, 2018 and TruHeXEn 2019 all work. They all boot to the main menu and operations can be performed from the menu. 

My Xbox is a v1.1 and has a Philips DVD drive.

 

 

 

Link to comment
Share on other sites

Thanks guys, I really appreciate you bothering to reply to my problem.

It's not so much that I'm desperate about HeXEn, rather annoyed for not being able to figure it out.

It's the same Samsung drive swapped between two Xboxes yes. Standard composite cable used in both cases. Seems that instead of processing thecongif-xml file I'm just getting the splash screen (Unleash X stays on for 5 secs).

Link to comment
Share on other sites

Not sure I understand why that would matter, when the DVD works in another XBOX?

Anyway, helpful for all suggestions :)

TruHeXEn 2019 - default.xbe - 22.272, config.xml - 223.815 (Verbatim DVD-R)

TruHeXEn 2019 - default.xbe - 22.272, config.xml - 223.815 (TDK DVD-R)

HeXEn 2017 - default.xbe - 22.272, config.xml - 220.843 (Verbatim DVD-R)

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.