Jump to content
OGXbox.com

Winbond?


naits
 Share

Recommended Posts

Hello, I believe I've got a V1.4 with a Winbond TSOP. I am aware that I've got to solder some points here.. But what BIOS should I flash? And what should I use? hexen with raincoat?

And with the Bios checker it tells me it's a "modchip" or "homebrew"... What can that mean?

The xbox is softmoded.

First time flashing ;)

 

Thanks in advance.

 

IMG_20200202_015444.jpg

 

This is what it shows with XBOX BIOS CHCKER 5.0

 

IMG_20200202_022232.jpg

Edited by naits
Link to comment
Share on other sites

1 hour ago, naits said:

Hello, I believe I've got a V1.4 with a Winbond TSOP. I am aware that I've got to solder some points here.. But what BIOS should I flash? And what should I use? hexen with raincoat?

And with the Bios checker it tells me it's a "modchip" or "homebrew"... What can that mean?

The xbox is softmoded.

First time flashing ;)

 

Thanks in advance.

 

IMG_20200202_015444.jpg

 

This is what it shows with XBOX BIOS CHCKER 5.0

 

IMG_20200202_022232.jpg

1st off delete that BIOS checker it's CRAP. It only reports the BIOS that was used to boot and if you have soft modded it that's what is reporting not the onboard BIOS Chip

You need to add the links on the main board R7D2 and R7D10 to enable the TSOP flashing.

Then I use Xblast to flash the TSOP chip this what ever 256kb BIOS your planing on using.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Link to comment
Share on other sites

5 hours ago, SS_Dave said:

1st off delete that BIOS checker it's CRAP. It only reports the BIOS that was used to boot and if you have soft modded it that's what is reporting not the onboard BIOS Chip

You need to add the links on the main board R7D2 and R7D10 to enable the TSOP flashing.

Then I use Xblast to flash the TSOP chip this what ever 256kb BIOS your planing on using.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Okay okay, I just ran it of a dvd. But then I can just throw that away ;) 

I am going to add those links today. And I will try to get a hold of xblast. Ind 5004.67 is what I am planning to use. Will update here if everything goes well, and ofc if it doesn't :D

 

but thanks!

Link to comment
Share on other sites

5 minutes ago, SS_Dave said:

Here is Xblast

https://www.dropbox.com/sh/s6a24019u5lsv2j/AABoyFw10RwO0QKNx2iU7AQea?dl=0

And here is IND bios

https://www.dropbox.com/s/7izf8cxvzgsykmv/iND-BiOS.5004.67.bin?dl=0

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Awesome! Thank you!

I've downloaded those files now. And I will be doing the solder during today, and I will try to flash it :D Really, thanks!

Link to comment
Share on other sites

6 hours ago, SS_Dave said:

Copy Xblast to the C drive and copy the bios.bin to a folder c:/bios

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

I've have now been successfully flashed! I ended up using Hexen 2018.. I didn't get xblast to boot for whatever reason.

I chose the ind bios 5004.67 from the menu within hexen for the winbond tsop. And it worked.

 

Thanks again.

Link to comment
Share on other sites

6 minutes ago, SS_Dave said:

All good

I would not touch Hexen with a 20foot barge pole, the final straw for me was I tried to use one of the apps on the disk and when I rebooted the Xbox my dash had changed.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Hehe, yea after I used it the dashboard changed a bit.. But for now it's fine by me. But I've seen some nice ones here and there.. Do you recommend any specific ones? :) 

Link to comment
Share on other sites

You will find that any time you use the Hexen disk it defaults your dash.

I use a SlaYers disk that leaves thing alone and doesn't leave a foot print on your hard drive.

Have a look at XBMC4Gamers but the choice of Dash is a personal thing.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Link to comment
Share on other sites

3 minutes ago, SS_Dave said:

You will find that any time you use the Hexen disk it defaults your dash.

I use a SlaYers disk that leaves thing alone and doesn't leave a foot print on your hard drive.

Have a look at XBMC4Gamers but the choice of Dash is a personal thing.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Ahh okay, well I guess I am making a slayers disk then ;)

But yea XMBC4Gamers, I have it as an app right now.. But I would like it to boot that as default, but I am not sure how to change that at the moment.. So I am looking into that :D 

And it's currently downloading MAME emulator, so I gotto wait for that... 

Link to comment
Share on other sites

10 minutes ago, SS_Dave said:

With IND bios there is a config file on the c:drive you should be able to set it there or hexen can change the default dash as well

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Ahh I see!! 

I changed DASH1 from: DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe            to: DASH1=\Device\Harddisk0\Partition1\Apps\XBMC\default.xbe

In a file named ind-bios.cfg

And it worked flawlessly! Thanks.

  • Like 1
Link to comment
Share on other sites

  • 3 months later...
  • 4 weeks later...
On 2/2/2020 at 4:26 PM, naits said:

 

 

On 2/2/2020 at 4:26 PM, naits said:

Ahh I see!! 

I changed DASH1 from: DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe            to: DASH1=\Device\Harddisk0\Partition1\Apps\XBMC\default.xbe

In a file named ind-bios.cfg

And it worked flawlessly! Thanks.

I couldn't find the config file for ind bios, so i used a custom m8 plus bios with the path for xbmc4gamers and flashed via gentoox lol

Edited by Lenox
Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.