ooga Posted January 27, 2020 Report Share Posted January 27, 2020 (edited) Hey guys I'm running into an issue using hddguru raw copy an it get to about 14% And comes up with this error in the picture below I've tried multiple hard drives and I am now wondering if it's the torrent I downloaded. Has anyone else had these issues and might know how to fix them. Your help is much appreciated thank you for your time Edited January 27, 2020 by ooga Quote Link to comment Share on other sites More sharing options...
nikeymikey Posted January 27, 2020 Report Share Posted January 27, 2020 Is this the Arcade Punks image? If so you are not the first person to have issues with this. Quote Link to comment Share on other sites More sharing options...
ooga Posted January 28, 2020 Author Report Share Posted January 28, 2020 (edited) 8 hours ago, nikeymikey said: Is this the Arcade Punks image? If so you are not the first person to have issues with this. Yes it is but only the torrent and not nzb which is where I've seen all the issues come from and not so much on the torrent Edited January 28, 2020 by ooga Quote Link to comment Share on other sites More sharing options...
TheAfroman Posted January 28, 2020 Report Share Posted January 28, 2020 it's seriously easier to just download the games individually and make your disk Quote Link to comment Share on other sites More sharing options...
ooga Posted January 28, 2020 Author Report Share Posted January 28, 2020 Ya i already have my own setup bit wanted this for my Friends as it looks vert clean Quote Link to comment Share on other sites More sharing options...
ooga Posted January 29, 2020 Author Report Share Posted January 29, 2020 I actually figured it out it was still missing part of the .imgc so i reopened BitTorrent and reloaded the torrent file to make it do a check and sure enough it was missing 34mb of file. once it finished downloading i opened hdd Guru raw copy and bam it copied with no isseus Quote Link to comment Share on other sites More sharing options...
Chrismerica Posted January 30, 2020 Report Share Posted January 30, 2020 I downloaded the image from arcade punks via torrent. I then used hhd raw copy tool to copy to 2tb hd. when i installed it in the xbox (hard modded) with 80pin ide cable I get error code 13. Any thoughts Thanks Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted January 30, 2020 Report Share Posted January 30, 2020 Which BIOS are you booting from your modchip/TSOP? Quote Link to comment Share on other sites More sharing options...
ooga Posted January 30, 2020 Author Report Share Posted January 30, 2020 16 hours ago, Chrismerica said: I downloaded the image from arcade punks via torrent. I then used hhd raw copy tool to copy to 2tb hd. when i installed it in the xbox (hard modded) with 80pin ide cable I get error code 13. Any thoughts Thanks i would say make sure your partitions are set correctly 927 for f and g at 64 clusters using xbpartitioner Quote Link to comment Share on other sites More sharing options...
ooga Posted January 30, 2020 Author Report Share Posted January 30, 2020 12 hours ago, KaosEngineer said: Which BIOS are you booting from your modchip/TSOP? alladin chip with the m8 bios Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted January 30, 2020 Report Share Posted January 30, 2020 Try to boot a HeXEn 2018 installer disc and go to the administrative menu option and run XBPartitioner v1.3 Take a picture of the main screen and post it. You should also be able to use the UnleashX's file manager/explorer from there to obtain a directory listing of the C, E, F and G drives. Quote Link to comment Share on other sites More sharing options...
Chrismerica Posted January 30, 2020 Report Share Posted January 30, 2020 8 hours ago, ooga said: i would say make sure your partitions are set correctly 927 for f and g at 64 clusters using xbpartitioner Yes I partitioned 927 for f and g at 64 clusters. I have it tsop flashed using the 2019 hexen disc with the evo with f and g Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted January 31, 2020 Report Share Posted January 31, 2020 Doesn't matter what you do before using the HDD Raw Copy Tool to write the 2TB Origins image to the hard drive. When you do the restoration, the hard drive's contents are all overwritten. Quote Link to comment Share on other sites More sharing options...
eightbit Posted December 23, 2020 Report Share Posted December 23, 2020 (edited) On 1/29/2020 at 7:18 PM, Chrismerica said: I downloaded the image from arcade punks via torrent. I then used hhd raw copy tool to copy to 2tb hd. when i installed it in the xbox (hard modded) with 80pin ide cable I get error code 13. Any thoughts Thanks I realize this is an old thread but I keep seeing this over and over. You are getting error 13 because your TSOP BIOS is not looking in the proper location for the XBMC or Unleashed dashboards in the Origins image. If you TSOP flash the EvoX BIOS on the Hexen 2018 disc you will have the correct BIOS for this image. I would advise however to use the Hexen 2018 disc to TSOP flash the EvoX BIOS to it and THEN image the 2TB drive and install it. If you so much as launch the Hexen 2018 disc WHILE the already imaged 2TB drive is installed the Hexen disc will overwrite the dashboard settings. Edited December 23, 2020 by eightbit Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted December 23, 2020 Report Share Posted December 23, 2020 5 minutes ago, eightbit said: I realize this is an old thread but I keep seeing this over and over. You are getting error 13 because your TSOP BIOS is not looking in the proper location for the XBMC or Unleashed dashboards in the Origins image. If you TSOP flash the EvoX BIOS on the Hexen 2018 disc you will have the correct BIOS for this image. You foget to say which. It needs an bios which boot "C:\evoxdash.xbe". ;) Quote Link to comment Share on other sites More sharing options...
eightbit Posted December 23, 2020 Report Share Posted December 23, 2020 1 minute ago, sweetdarkdestiny said: You foget to say which. It needs an bios which boot "C:\evoxdash.xbe". Yes! And, I also forgot to say that using the OGXBox Installer is the better and safer solution for the TSOP flashing Which reminds me of a small bug I found. PMed Quote Link to comment Share on other sites More sharing options...
Japaul Posted October 11, 2022 Report Share Posted October 11, 2022 I also have a question relatively similar to this and would love help!! I kinda got screwed by someone. Im pretty decent and handy modding but in this instance past my expertise i bought a 2 tb origins modded xbox from a guy who does them alot and sells them and when i got it everything works great BUT everytime i do the L+R+Back+Black to reset when i wanna change games it acts like everythings gonna load up like when i start it but than i get 07 error code....its only when i do that reset. If i power off and back on again it works fine...ive messaged the guy hed told me it mighta been something with the bios hed forgotten to do but now he wont ever respond to me....any help would be greatly appreciated as i paid over 200 bucks for this and this is kinda a very annoying problem... Quote Link to comment Share on other sites More sharing options...
Raja Posted October 12, 2022 Report Share Posted October 12, 2022 It’s possibly your SATA IDE adaptor, buy a startech Or if you have the WD Green drive turn off head parking. Quote Link to comment Share on other sites More sharing options...
Japaul Posted October 12, 2022 Report Share Posted October 12, 2022 How do you turn off head parking? I dont believe i have the WD green drive do u mean like its actually a green HDD? Lol and okay ill try a new adapter first and see if that helps. Thatd cause it to do this only when i reset the system through the controller button combo? Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted October 12, 2022 Report Share Posted October 12, 2022 50 minutes ago, Japaul said: How do you turn off head parking? I dont believe i have the WD green drive do u mean like its actually a green HDD? Lol and okay ill try a new adapter first and see if that helps. Thatd cause it to do this only when i reset the system through the controller button combo? He's right. Sometimes the cheapo SATA adapters don't get the drive ready quickly enough and it results in an error. Startechs don't seem to have this problem, from what I know. Quote Link to comment Share on other sites More sharing options...
Japaul Posted October 12, 2022 Report Share Posted October 12, 2022 Okay cool ill try that than and keep ya updated thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.