Jump to content
OGXbox.com

Help !


shaokhann
 Share

Recommended Posts

3 hours ago, shaokhann said:
raduci in Inglese 
 
 

Morning, boys. A friend flashed Atr the bios at an xbox 1.6 with aladdin xt and hdd 160 gb. He put a bios for 1.0-1.5 instead of a bios for xbox 1.6. Now the xbox gives error 5 always. Can I fix it?

You'll need to replace the sst 49lf020 with one that has a good bios for a 1.6. Once it boots and you go into evox or your flashing program of choice... you can swap the chips BEING VERY CAREFUL while doing so as the console is on. Then once the one with the bad flash is in, you can flash it with a good bios. This is called the hotswap method and can be risky if you're not careful. 

  • Thanks 1
Link to comment
Share on other sites

It might be better to post a pic of the main board 1st.

What OGXbox Admin is talking about its swapping this bit.

.513328679_AladdinPlus.thumb.jpg.9683edde804b2eb6fc689908a67e3b25.jpg

If the chip can be unplugged you can swap the whole chip to a working version 1.0-1.4 Xbox with the same mod chip and reflash it with the correct BIOS.

 

Cheers

SS Dave

 


Those that can Hard-Mod. Those that can't Soft-Mod.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.