Hi I’m new here, just signed up. I’m hoping I can get my Xbox fixed.
the problem is my Xbox doesn’t turn on all the way when I have my component OR composite cables plugged in, it turns on, briefly shows orange, then shuts off but when I unplug the video and turn it on the Xbox seems fine? (But no video of course) I’ve looked at the model date and it’s a 1.6b. I have a picture of the clock capacitor and to me it seems fine though I’m kinda new to this sorta thing. Can my Xbox be fixed? Is there some other issue with it? (It IS softmodded with UnleashX installed) Thank you
Please login or register to see this attachment.
Just curious is there a specific ide cable people use as a replacement?
I have a 500gb data drive installed now. And saw people advise to upgrade to a 80 wire cable.
Problem is the connectors just don't seem right on a of cable I tried. Distance between them is not right and won't work
I posted this on a few xbox groups and thought i'd share it here too.
I basically remove the jewel, use a dremel to make a circular hole where the jewel was and then attached a round 800 x 800 pixel (3.4") lcd.
The video is provided by a small media player such as the Sumvision Cyclone +2 but i am also going to set it up with a raspberry pi zero to save space. Using the small media player means having to lose the dvd rom due to space confinements.
The interface between the lcd and media player is a HDMI to MIPI pcb with 50 pin flat ribbon cable, you can find them on most china electronics websites. The video is just some boot videos i found and stitched together. This media player can loop playback on start up provided the video is placed in a folder in the root of an SD card or USB stick named AUTOPLAY
Board Life Status
Board startup date: April 23, 2017 12:45:48