Ryzee119 Posted November 3, 2021 Author Report Share Posted November 3, 2021 Make sure in your LCD.xml you change LCD.timeWide21, LCD.timeWide22 with something else as this is bugged out in xbmc with xenium chips 2 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted November 4, 2021 Report Share Posted November 4, 2021 8 hours ago, Julian1945 said: Hello KaosEngineer , I just attached a few pictures of my installation, please confirm that everything looks ok thanks for your help Looks good to me. Try what @SS_Dave suggested in the previous post. Edit: The only thing that may be questionable is the length of the red wire jumper connecting the Arduino to the adapter board's CS pad. Make it as short as possible instead of having that big loop of wire. 1 Quote Link to comment Share on other sites More sharing options...
Julian1945 Posted November 4, 2021 Report Share Posted November 4, 2021 Yes, I have seen videos with the cable a little shorter, I think you are right on that, I’m going to give a try and make the jumper shorter, thanks for your help! Quote Link to comment Share on other sites More sharing options...
Julian1945 Posted November 5, 2021 Report Share Posted November 5, 2021 I found the problem!! it was on the guisettings for some reason It wasn’t changing with the xbmc4gamers dashboard settings I had to do it manually on the guisettings it was <modchip>0<mod chip> I modified with a 1 <modchip>1<modchip>… anyway thank you for the help without your help guys I would never be able to found out, also thanks to you now I'm very interested in do coding. Thank you Ryan and kaosengineer. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.