Jump to content
flux_no

640x200 120hz On Ebay Hdmi Adapter

Recommended Posts

Hello,

So i revived my V1.0 PAL Xbox (TSOP modded with evox m8 bios) and ordered an HDMI adapter on ebay, hoping to get better resolution in the menues and games that support it.

i bought this: Please login or register to see this link.

Ive used the hexen dvd to activate the 480p,720p and 1080i in the MS dashboard.

but when i start the system my projector freaks out and states that it first recieves a 480i signal, then a 640x200 120hz(!) signal. Any clue to what this could be?

i'm running through a onkyo tx-nr626 av reciever and a optoma 200hd projector. the onkyo just denies passing the 640x200 signal trough. if i connect the projector directly to the hdmi adapter i get a very strange image(probably just the 640x200 data overlapped)

I can change to the normal composite cable without any issues in 480i trough the reciever and projector with 1080p upscaling.

 

 

Share this post


Link to post
Share on other sites

Hi flux_no

 

Sorry to say but I got one of those HDMI adaptors from aliexpress and I think it's a piece of crap the vidieo signal is all-ways swapping 480,720 50hz,60hz ect tested on 3 diferant Xbox's. So in the junk box it when't. The pound version was ok but had the occasional frezing/glitching on one of my Xbox's and with a bit of reading showed that a version 1.4 I think had some issues.

If you can send it back and get a refund do it or get one of the Wii2hdmi adaptors and use the Xbox Avip plug and lead from it and make your own.

 

Cheers

SS Dave

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By nikeymikey
      Hi guys, I know these things are rare but i kinda feel this guy is taking the piss!! £350!!! I paid only £50 for one of these in the same state (unused, boxed) only a couple of months ago!!
       
      Please login or register to see this link.
       
      At £100 i'd consider it but tat would still be a bit of a piss take i feel.
    • By Frank D'Agostino
      Took me 2 days to get all the wiring right. for the wii2hdmi for og xbox modd ... using a wii2hdmi device ordered off eBay you can also find an Alibaba and other places like this. Very inexpensive around 5 Canadian dollars. You're also going to need some sort of a donor Xbox RCA wires or component wires in order to pull this off. There is 11 connections total five of which are ground I do not suggest not adding all the ground cuz could cause interference. Had pretty good luck I made to both of them are crystal clear with no interference. I tested on version 1.0 as well as version 1.4 turned out very good. I tried to look up and down online for some sort of schematic nothing appeared. There was one picture that was in Spanish but it was misleading I tried to look into it to find out who the original inventor was found the person at XB Classics a Brazilian site. After conversating with him he told me that he had better pictures but he would not share. Then I noticed a site that they has linked where they were selling these to the equivalent of 40 US dollars a piece so that is the reason the images that they uploaded are just there to confuse people. So that they cannot make it. Does not include audio left or right. And apparently La stands for 5 V? Don't ask me but that's what the guy told me makes no sense at all. I spent two days getting the wiring correct. I documented everything and put it on a YouTube video (link2come) was trying to figure out the best way to make this readily available for everybody in the world any Xbox Enthusiast should have a low cost HDMI adapter solution available to them this is where these schematics come in. Again I didn't notice any interference at all. Just a little bit in the Bios when only running 480 but there's not much you can do unless you re Flash the BIOS to force. I've noticed people in the group posting pictures not even having soldering skills and getting very good results from this method. In theory you can use this exact same adapter in order to have an internal HDMI solution. These images are water marked because these are going to be the only good images that are online and I seen the way XB classic does their water mark and it really bugs me that they did that so I wanted to make sure that everyone knows where it came from. That being said I'm Mister James Reid really helped me out with this he volunteered his services in order to take my hard copy drawings that were on paper and make it look something presentable. Which he did and he did a great job thank you very much James I did in fact alter the images to have the watermark across them. Sorry about that but I figured since I put in the work I deserve to have my name on it. If you have any questions please do not hesitate I do not check this site every day but I do come in from time to time. Thanks again and I hope people online can use this receive money from the big corporations like pounds and hyperkin charging ridiculous amounts of money for something so cheap... I've also got a lot of questions recently about people asking if this is any better than component. It uses the component wires in order to transfer the signal into HDMI. I'm not too technical with that end but when looking up the chip number on the actual board for the Wii to HDMI adapter I did notice in there schematics and their breakdown for the actual board they did mention that the video board that does the decoding actually does video on hand splint what kind of video enhancement I have no idea. But it should be an enhancement over component if they are speaking the truth. Anyway gentleman without further delay here are the schematics. I hope this hope somebody somewhere. Thank you very much Frank
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By godofpoo
      Since I had taken these pics to show N64Freak to troubleshoot my DIY install of his internal HDMI mod, I figured I could also post them here.

      This is my 1.6 XBOX motherboard. Since it runs my arcade pedestal, I only needed the board itself. It is on wood and plastic spacers off the wooden base I created.
      Standard AladdinXT modchip.
      For a much quieter, and at least as cool if not cooler, machine I replaced the heatsinks with these GPU coolers. Works after a few hours of play and no temperature issues.

      Here is the Toslink optical port mounted (still having some issues getting sound out of it for some reason)

      And here is another view of the HDMI install.
      My advice for anyone else doing this install is to use good solder, good flux, and a HOT iron. And double check every connection with a multimeter, as from some of the install steps, there is no turning back to fix.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.