Jump to content
Kura

What Solderless XEcuter Mod Chip Is This?

Recommended Posts

Hi everyone.

What Xecuter MOD Chip is this?  I tried browsing the stickies but couldn't find a matching picture.  The only thing I remember is that this was solderless.

Also, is there a diagram somewhere that I can solder it into the XBOX instead? 

Thanks in advance.

Please login or register to see this attachment.

Share this post


Link to post
Share on other sites

Looks like you could remove the spring contacts and fit a connector and solder direct to PCB

x2_lite_plus_on_board_xs.jpg.d0eca2af35c9769e8c0cb96af296ee3c.jpg

The pin on the right is proberly D0 point.

Thats about all I could find easly.

 

Hope it helps

 

Cheers 

SS Dave

Share this post


Link to post
Share on other sites

Thanks!  I bought a pinheader, removed the springs and soldered it on (and wire soldered the d0 and adjacent pin)

Question though, I don't remember how big the banks are on this thing.  If I remember it's 512 per bank, totaling 1mb but I'm not sure.

 

Also I'm currently on BIOS Xecuter2 4980.06.  Is there anything else to go to other than the latest one I found on XBINS (4983.67)

Edited by Kura

Share this post


Link to post
Share on other sites

Yep it can.  Ahh i'm already past all that.  It's soldered in and bootable in both banks on that BIOS.  Was just wondering if I can flash it to anything else.  I've been outta the game too long.

Share this post


Link to post
Share on other sites

4983.67 is fine.

As you have 2 banks you could try a 512k bios if that fails you still have the other bank to boot with then use  a 256k version.

Some of the early 512k bios were really just a 256k version fllashed twice to fill the memory.

 

SS Dave

 

Share this post


Link to post
Share on other sites

Yep I learned that the hard way last night heh.  That was mostly my point in chipping it... the bigger BIOS.  I tried a few

- The X2_5035 512 and no picture (waited 10 minutes in case the config had to kick in)

- Tried the X2.4983 512 and it just sat at the Xecuter splash screen.

- But then I tried the X2.4983 256 and it did the same as the 512. 

When I flash I load the XBOX off Bank 2 that goes to old XBMC 2.00.  Then I load FlashX 1.2 from programs (after I FTP a bios into C:\BIOS) and use that.

 

I thought the Xecuter 2.2 Lite Solderless had 2 banks... both 512.  I'm probably just doing something wrong.  But anyway FlashX always shows 4 BIOS no matter what so maybe it's just not supported.

Is there a better way to flash?  (other than discs, although that is an option because the drive works).

Edited by Kura

Share this post


Link to post
Share on other sites

Scratch that I'm just dumb and renamed the wrong BIOS earlier.

X2 5035 512 Old version renamed to bios.bin and stuffed into the C:\BIOS directory worked just fine.

Just going to upgrade XBMC and I'll be good to go.

 

I appreciate the replies.  Thank you again.

Share this post


Link to post
Share on other sites

There’s already a pin header socket on the modchip to plug it onto a pin header soldered into the LPC Debug port of the Xbox. No need to remove the pogo pins. Turn it upside down and connect it to the pin header. 

Follow the traces on the PCB to make sure you have it connected the right way around. 

 

Oh by the way, it looks like an X2.3 lite+ 

See:

Please login or register to see this link.

For specs, read the Xecuter Lite Plus 2.0/2.2/2.3/2.3b column at:

Please login or register to see this link.

Share this post


Link to post
Share on other sites

I must have turned off notifications to this.

Yes I have the external switch board still, works wonders other than the adhesive.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By dieabeato
      Have 2 hard modded Xbox and trying to upgrade to 500gb haven't messed like this in years :( figures crossed it works for me. 
    • By nikeymikey
      Hi guys, I know these things are rare but i kinda feel this guy is taking the piss!! £350!!! I paid only £50 for one of these in the same state (unused, boxed) only a couple of months ago!!
       
      Please login or register to see this link.
       
      At £100 i'd consider it but tat would still be a bit of a piss take i feel.
    • By iDJMic
      What you see is what you get, brand new in package X3CE Xecuter 3 Kit.  Accepting offers.
       
      Please login or register to see this attachment.
      Please login or register to see this attachment.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.