Vulcan_Zombie Posted July 30, 2019 Report Share Posted July 30, 2019 I accidentally bridged the two pads below the bt pad to the bt pad will the chip still work? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 30, 2019 Report Share Posted July 30, 2019 No, they need to be unbridged. You at least will have a short between ground and 3.3Vdc (LPC pin 9 - 1st pad below BT) and wherever the 2nd pad below BT connects to if you don't unsolder the bridge. Please post a picture of the bridged connections. Update: I think, not 100% sure though, I tracked down the signal on the corner pad (2nd down) from BT = Ground. It's not good to have 3.3Vdc (first pad down) and ground (second pad down) tied together when you power on the Xbox. Quote Link to comment Share on other sites More sharing options...
Vulcan_Zombie Posted July 31, 2019 Author Report Share Posted July 31, 2019 I'll take a picture when I get home I'm at work now Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 31, 2019 Report Share Posted July 31, 2019 Not that a picture really matters. The solder needs to be removed to disconnect those three pads from each other. They should not be connected together in any way. Quote Link to comment Share on other sites More sharing options...
Vulcan_Zombie Posted July 31, 2019 Author Report Share Posted July 31, 2019 Yeah I just went ahead and fixed them I was just trying to avoid that because I'm not very good at soldering Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.