SS_Dave Posted July 5, 2019 Report Share Posted July 5, 2019 Hi All It took a bit but it's working the way I wanted. All hidden inside the case. I wanted to be able to retain the Original controller or plug in a wireless adapter for the Xbox360 wirless controller. Using Ryzee119's adapter and some switching and making use of the light gun wire I got it working. At this stage it is just the 1st port with the other ports untouched. The only small issue is the 5 second delay before the 360 controller will work after that the there doesn't appear to be any lag between the 2. The video clip should give you the idea of what I wanted. https://youtu.be/rVq23B0gLdU Cheers SS Dave 3 Quote Link to comment Share on other sites More sharing options...
irlandez Posted July 5, 2019 Report Share Posted July 5, 2019 Hello bro. tell us more about how you implemented the connection inside the console. I also have an adapter from Ryzee119 on my hands. while I can not check it, waiting for the wires and adapters with aliexpress. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 26, 2019 Author Report Share Posted July 26, 2019 A quick update on how I did my version of the internal OGX360 adaptor. I modded this way becacause i wanted to be able to use either a wired or the wireless control, I also didn't want to have a separate switch,switches and extra port for the wireless adaptor and it also had to be kid proof plus as a bonus the case is untouched. This is version 2 you don't want to see version 1. Even this PCB could have been made a bucket load smaller but it is version 2. The Video is version 2 in operation. At the monent and when time permits I am working on version 3 that will use all ports including auto switching between wireless and wired. Meaning the ports are all wireless if the wireless adaptor is pluged in but if you plug in a wired controler into port 2,3 or 4 it takes over that port and hopefully it will be all SMD and plug in to the Xbox control conectors internally so no mods to the Xbox and easly removable if wanted. I used 4 pole change over electrionic relay to change the USB lines between the Wired control and reroute the USB signals via Ryzee119's adaptor when the wireless adaptor is pluged in but I had to add a short delay for the power on the OGX360 PCB to make it reliably conect to a 360 control. A sacrifical control extension lead was used to replace the USB lead in the 360 wireless adaptor as shown in the 1st pic. In the intrest of making it as small as posable I didn't use USB plugs but soldered wires to the OGX360 PCB which is heat shinked along with the switching board I made and easly fits inside the Xbox without any cutting. I will post more in time as I progress with this project. Cheers SS Dave 1 Quote Link to comment Share on other sites More sharing options...
Ryzee119 Posted July 29, 2019 Report Share Posted July 29, 2019 Love the old veroboard modding. This is awesome and definitely a very unique xbox now! great job. 1 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 29, 2019 Author Report Share Posted July 29, 2019 9 hours ago, Ryzee119 said: Love the old veroboard modding. This is awesome and definitely a very unique xbox now! great job. Thank's I prefer the unhacked up look with the mod cons A bit like a sleeper car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.