Gorrillasnot Posted June 19, 2019 Report Share Posted June 19, 2019 I'm trying to upgrade a already softmodded xbox with rocky5's Build v1.1.6. All I get is blank screen I have tried burning the extras disc to DVD, also I FTP'd the quick upgrade to E:\, and also FTP'd the extras disc atacher (with extras disc iso) folder to E:\apps. Am I doing something wrong? Quote Link to comment Share on other sites More sharing options...
Magicaldave Posted June 19, 2019 Report Share Posted June 19, 2019 Either burning the ISO to dvd or extracting the contents of it and FTP’ing those over should be sufficient. How’d you burn it? Also, what’s the console modded with already? TSOP/chipped consoles would expect this to happen as the softmod conflicts with a proper hacked BIOS. Quote Link to comment Share on other sites More sharing options...
Gorrillasnot Posted June 19, 2019 Author Report Share Posted June 19, 2019 (edited) Burnt it @ 8x using imgburn. Also tried to ftp it over and run the default.xbe. The xbox is a version 1.0 that I was trying to TSOP.. Was sucessful bridging R7D3, but lifted a trace at R7R3. Maybe R7D3 being bridged is a problem? Although I was able to upgrade the original softmod with hexen 2017, maybe rocky's is mor picky? thanks Edited June 19, 2019 by Gorrillasnot Quote Link to comment Share on other sites More sharing options...
Magicaldave Posted June 19, 2019 Report Share Posted June 19, 2019 You know, I’m sorry, but I’m not exactly sure what I’m looking at here. Is your screenshot what was FTP’d to the system? Burning to DVD should work okay but it seems like there may be a bit more there than necessary. Extras disc should come out a little over 700MB, your ISO is twice that size. It is possible to run XISOs but as far as I know it actually requires you to have Rocky5 installed already. More of a tool for games with super long file names that just don’t work on HDD. Please clarify exactly what you had FTP’d over. It should just be This entire directory. /Xbox-softmodding-tool/extras disc and all of its contents can go anywhere they’ll fit on your hard drive. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted June 19, 2019 Report Share Posted June 19, 2019 @Gorrillasnot, check the BIOS version that you are booting. Are you sure you didn't get the TSOP flash to work? A Blank screen when you expect the replacement dashboard to be displayed is a symptom of trying to boot a modified BIOS on an already softmodded console. Update: Reading your other post about lifting a trace during TSOP attempt. Guess this is the same console left softmodded. Do you know how it was softmodded? Quote Link to comment Share on other sites More sharing options...
Gorrillasnot Posted June 19, 2019 Author Report Share Posted June 19, 2019 Magicaldave: My directory for the extras disc doesnt look like the link you posted..I will download it again. KaosEngineer: I'm pretty sure the TSOP didn't work.The bridged point at R7D3 looks perfect but I couldn't get solder to stick to the pad or lifted trace at R7R3. The xbox came from a home with multiple smokers and has a terrible amount of buildup on the board . I tried cleaning several times with alcohol and it didn't seem to help. It was originally softmodded with ndure 3.1 using a xboxhdm disc, then after my failed attempt to TSOP I updated the softmod with hexen 2017 which completed no problem, I then tried to use rocky5 and that's where I'm stumped. thanks Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted June 20, 2019 Report Share Posted June 20, 2019 Can I check that it goes to a blank screen once you try to load Rocky’s Disk or from when you turn on the xbox? Quote Link to comment Share on other sites More sharing options...
Gorrillasnot Posted June 20, 2019 Author Report Share Posted June 20, 2019 I never could get it to work on the old softmod, so I made a new xboxhdm/ndure3.1 disc and redid the softmod, then rocky5's extras disc booted up fine and I upgraded. thanks 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.