Localhorst86 Posted August 8, 2020 Report Share Posted August 8, 2020 can't seem to edit the above post. I have tried both versions of the firmware, with the same result (with the exception that I had to switch PB and EB on version 1000, as mentioned in the readme). I have tripple checked all connections and soldering, and I can see that the IR receivers get a voltage of 3.3V. I can also see a voltage of 2.8V applied to the SCK pin of the attiny85 IC when idle, which drops to 2V when pressing a button on the remote. Am I just using incompatible IR Receivers? Which IR Receiver would I need to use? Quote Link to comment Share on other sites More sharing options...
Localhorst86 Posted August 11, 2020 Report Share Posted August 11, 2020 Ok, at the risk of talking to myself and appearing like a lunatic in the process, I figured it out. I bought a VS1838B ir receiver at a whim and low and behold, using this part everything works. 2 2 Quote Link to comment Share on other sites More sharing options...
zzattack Posted February 27 Report Share Posted February 27 Another clone. Credit to original sickmods design, this is electrically 1:1 with the addition of pins for the programming header on the right side. Contrary to all the other clones this one actually publishes kicad schematic + board layout, instead of a PNG of the .sch and gerber output, since I really do not care if someone wants to modify this or put their name on it. https://github.com/zzattack/xerc2/releases/tag/v1.0 2 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted February 27 Report Share Posted February 27 4 hours ago, zzattack said: Another clone. Credit to original sickmods design, this is electrically 1:1 with the addition of pins for the programming header on the right side. Contrary to all the other clones this one actually publishes kicad schematic + board layout, instead of a PNG of the .sch and gerber output, since I really do not care if someone wants to modify this or put their name on it. https://github.com/zzattack/xerc2/releases/tag/v1.0 You came out of the woodwork, ZZ! I'm gonna build one for my X3! Thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.