Canhaotigerpaw Posted May 23, 2019 Author Report Share Posted May 23, 2019 52 minutes ago, Ging3rguy said: I think you have a chip problem rather than a trace problem as you have said that it boots up to M$ dash fine. Does it also turn off okay? check you have not dislodge any of the wires coming off of the the chip to the motherboard. If you have a multi meter check for continuity of the connections. Its working just fine now that i cleaned under the MB.thanks. Quote Link to comment Share on other sites More sharing options...
Canhaotigerpaw Posted May 23, 2019 Author Report Share Posted May 23, 2019 (edited) 43 minutes ago, KaosEngineer said: Any HeXEn disk will work. Some have older versions of software. It boots into UnleashX. The BIOS doesn’t format the hard drive that’s done by the dashboard or other software like XboxHDM on a PC. Thus, the need to use an installer disk. P.S. Where does the wire soldered to the BT pad on the modchip go? The bt wire goes to r3g4. My hexen says im missing the ms backup Edited May 23, 2019 by Canhaotigerpaw Content Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted May 24, 2019 Report Share Posted May 24, 2019 Backing up the M$ dash will not effect flashing the bios, but you can add a backup to your E partition to stop it showing you that. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted May 24, 2019 Report Share Posted May 24, 2019 15 hours ago, Canhaotigerpaw said: The bt wire goes to r3g4. Okay, that's the same as connecting it to pin 2 on the back of the front panel 1x9 header. Quote Link to comment Share on other sites More sharing options...
bluemeanie23 Posted May 24, 2019 Report Share Posted May 24, 2019 Aladdin++ ive got one here infront of me right now and can verify the board design is spot on but not the .hex files ive never tried them hkmodteam cloned it from xenomods among a few others which are in this pack enjoy Quote Link to comment Share on other sites More sharing options...
xbdavid123 Posted June 17, 2019 Report Share Posted June 17, 2019 This topic made me alot smarter! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.