Acidmank Posted May 17, 2019 Report Share Posted May 17, 2019 Re-flashing bios on dead aladdin x2 Plus2. Im not sure what went wrong but i tried to update the aladdin x2 Plus2 to the ind 5003 via Xblast ( loaded oh hdd ) The flash appears to be successful but after a reboot i got the 3 boots and frag. Now it appears the chip is dead.? Thankfully i had another X2 Plus 2 and using that i can boot again I thought maybe i could hot-swap the chip and re-flash the bad one. However when i pull the chip the console appears to freeze and video goes to black. Im running off a Hexe 0.99b11-22 heimdalls xbox engineerind disc to try and re-flash 1.6 pal xbox Any ideas if this is possible? Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 17, 2019 Report Share Posted May 17, 2019 4 minutes ago, Acidmank said: Re-flashing bios on dead aladdin x2 Plus2. Im not sure what went wrong but i tried to update the aladdin x2 Plus2 to the ind 5003 via Xblast ( loaded oh hdd ) The flash appears to be successful but after a reboot i got the 3 boots and frag. Now it appears the chip is dead.? Thankfully i had another X2 Plus 2 and using that i can boot again I thought maybe i could hot-swap the chip and re-flash the bad one. However when i pull the chip the console appears to freeze and video goes to black. Im running off a Hexe 0.99b11-22 heimdalls xbox engineerind disc to try and re-flash 1.6 pal xbox Any ideas if this is possible? I have never done this but i think its possible. Just to know,your xbox is fragging because the ind-bios is NOT compatible with 1.6 xboxes Quote Link to comment Share on other sites More sharing options...
Acidmank Posted May 17, 2019 Author Report Share Posted May 17, 2019 How how Silly of me. I see that you are correct ( I wanted to change the flubber and forgot about compatibility!! ) On a positive note, you can hotswap and reflash... I just had to do the swap before i started the flash software ( swapped at dash ) from unleash x thanks Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 17, 2019 Report Share Posted May 17, 2019 Np my friend. So did you swap and flashed the bad chip correctly that way? Quote Link to comment Share on other sites More sharing options...
Acidmank Posted May 17, 2019 Author Report Share Posted May 17, 2019 Yes, booting fine on the re-flashed chip with Evox M8 plus 1.6 F & G Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 17, 2019 Report Share Posted May 17, 2019 Happy to hear that,because i am going to do some bios testings soon and i am gonna need that method if anything goes wrong Quote Link to comment Share on other sites More sharing options...
Acidmank Posted May 17, 2019 Author Report Share Posted May 17, 2019 humm, all is not perfect but re-build-able My harddrive has grown is size. Its magic !! Who wants to buy a Very large drive? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.