Jump to content
  • Similar Content

    • By FerociousOG
      Unable to flash BIOS. Error reading bios file (see pic). To me it sounds like I have a bad DVD burn? Just wanted to confirm. I did burn at the slowest write speed. Will re-burn again.
      -v1.1 mobo
      -XeXEn 2018
      -Using Verbatium DVD+R media
      -Attempting to flash iND-BIOS.5004 (F and G) to use 2TB SATA HDD.

      Thanks in advance.
       
    • By Paw
      Hi guys i just found my old xbox in the basement and by the look of things it looks like its hardmoded with a Xecuter chip and there is even a 120gb drive installed and all is working without any issues. My main question is if anyone here could help me identify what kind of Xecuter chip this is, because my plan is that i would like to replace the 120gb drive with a 1tb but im getting a LBA48 warning when i try to partition the new disk and its asking me to ugrade the current bios with a new one that supports LBA48.
      Current INFO:
      Bios: Xecuter2 4976.02
      Kernel 1.00.5838.01
      Xbox v1.1
      What would be the best course of action, how should i approach the reflashing, what bios should i pick so that the new 1tb drive works as intended and ofcause what should i think about when i approach all this?
       
       
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By WHECL
      Hello,
      I bought a modchipped Xbox rev1.0. I want to remove the clock capacitor and don't want the modchip to be stuck on a clock loop, so I would like to know how to safely update the bios on the modchip through a burned CD/DVD. I've seen things like Slayers Disc and Hexen, but I'm not entirely sure how to proceed after burning them, and I'm not sure how safe it is and I don't want to screw anything up.
      My modchip I think is the Aladdin onde, has if you hold the power button it boots an old version (as far as I can tell) of EvoX, which besides running burned media and the logo on boot, looks just like the MS dashboard.
      Any help much appreciated.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.