Jump to content

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By Gameking513
      So I bought this xbox from my local pawn shop when i saw it come in for 45 bucks. I know there are better deals out there but this one looked clean and the stickers no the bottom where intact. Knowing the system hadn't been opened the first thing i did when I got home other than test the system (and relive halo 2 for a little while) was pull the case off to prep for the clock capacitor removal. For giggles and farts when I saw the focus chip above the cpu heatsink i tested the resistance on the ground port from the LPC bus and found what i'd like to think is a good condition 1.5v motherboard. Now I am really just looking for someone here with a little more experience to tell me if i found the legendary fable board or if I botched the test somehow. Also if it is real hat are the value of these? Thanks.  
      Please login or register to see this attachment.
    • By ferjreo989
      my xbox was the first console i bought with my own money. a few days ago it stopped working (cant recall the error) so i took the opportunity to upgrade the hdd. i kept a backup of the eeprom and i used the xboxhdm with the usb to sata cable. 
      worked somewhat fine, i got a "funtional" xbox with the dashboard. but i feel like im missing a bunch of things
      for example: fable wont run (comes back to dashboard)
      coin ops does the same
      i no longer have an option to clean the cache neither i have the option to launch the m$ dashboard (i used to)
      i have no idea what im suposed to do. 
      1.6b xbox, softmod only. im currently loading the hexen2019 in hopes that it has a "select this to INSTALL ALL THE THINGS" and be done with it. 
       
    • By gtinas
      Hi, so short i tried tsop. Solder points on 1.0 xbox and when i put my hexen 2018 copy it boots but can't flash anything. If i try to install application i just got error code 3 from hexen. If i try to open tsop flash tools it just stuck on loading/copying files. I tried to check with bios checker but it will not boot and xbox boots back to dashboard. So are this is my soldering is bad or what? Added mobo and hexen info (i can add more info latter, sry for not clean photo it's was best i have to see chips) 
      Please login or register to see this attachment.
      Please login or register to see this attachment.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.