Jump to content
lord_quinn

XBox 1.2 - 1.5 Christmas Lights

Recommended Posts

The dreaded lights have finally arrived. 

I recieved my xbox second hand and it was already modded.

I'm sure there's guide to this somewhere but I haven't seen it. Any ideas to the common causes and checks I should run? I've already started to take it apart and can't see anything terribly wrong, but I'm no expert...

Share this post


Link to post
Share on other sites

Depends on what exactly the behavior is. Does it restart at all? 

 

Do do you get video? Any error codes onscreen if so?

 

Finally, check this out to determine exactly what your LED is doing. If you’ve had the thing for a while HDD failure or clock cap fluid leaking are common reasons for a FRAG. 

 

Please login or register to see this attachment.

Edited by Magicaldave

Share this post


Link to post
Share on other sites

It can turn on after a couple cycles(of and on a couple times before it starts runnung), but it's always been like that.

Nothing comes up on the screen and the LED (disk light?) flashes Green and Red at an equal rate.

If it is a digital code error, what steps should I take to rectify it, if possible?

Edited by lord_quinn
spelling errors

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By NeTaXe
      Hi guys, unfortunately I will have to sell my precious Xbox with X3, X3CP, etc.
      It's in great conditions and works well. It comes with;
      Xecuter 3 chip installed Xecuter 3 panel X3CP with LCD screen 160GB harddisk with XBMC en CoinOPS installed Component and composite video cable Controller and extension cord Xbox remote Please see pictures attached for details.
      Asking 350 euro excluding shipping from the Netherlands.
      Cheers!
      Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment.
    • By SlimBoy
      I have a version 1.4 xbox that was TSOP modded with X2 4983.67 bios and 750gb IDE hard drive. I have flashed IND-5004.67 bios to it and now it does not see the G partition. I have tried to re-partition the drive to no avail, it will not see the G partition. If I boot the HEXEN 2018 disk it sees the G partition or if I re-flash the X2 bios it will also see the G partition. I am at a loss to what the problem I have is? Has anyone had this problem before. Thanks.
    • By Bigdddydee
      Is there a link to the installation process of the Origins game pack that has been going around which is a 1.7TB HDD image?
      all I am seeing is  that you need a program to clone the HDD But no other information beyond that. What do I actually do with it? How would I clone it to my Xbox HDD when I have smaller size partitions, does the program just split it? 
      The Origins Game pack  I am referring to is the ArcadePunks HDD image file that many people are using.
      thanks!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.