Jump to content
OGXbox.com

DVD drive wont boot. explained below


Gurjsagoo
 Share

Recommended Posts

Decided to do a clean install on my 2tb drive. Inserted the hexen disc and it wont read. It just keep booting up into xbmc4gamers.

So i decided to take the drive out and format it on the pc using fat xplorer. Now im getting error 13 or somtimes error 14. when connected back up. So i popped in the hexen disc and it wont read. Evo x shows in the corner and error comes up straight away

Now the weird thing

As soon as i plug my stock drive back in which the ide standard drive. Yes the ms dashboard loads and then starts reading the hexen disc.

im using the 80pin cable
open xenium chip
sata adaptor has no jumpers

Can any 1 explain what im doing wrong

Before i moded the xbox i was using a jumpered ide to sata adaptor. my new 1 doesent have any jumpers.

Could it be i need a startech adaptor

Link to comment
Share on other sites

Are you using a 80 wire IDE cable?

The statech brand of sata2ide has a set of 4 jumpers and it needs to be linked on master.

Where did the evoX bios come from? or was it the one on the chip from factory?

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to comment
Share on other sites

23 minutes ago, SS_Dave said:

Are you using a 80 wire IDE cable?

The statech brand of sata2ide has a set of 4 jumpers and it needs to be linked on master.

Where did the evoX bios come from? or was it the one on the chip from factory?

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

hello dave. nah it wasnt the factory bios. i flashed it myself. yes im using a 80 pin ide cable. the adaptor i was using before did have jumpers. the new 1 i have dosent have any at all.

all i no the hexen boots up with the stock HD. so im a bit puzzled as it could be the adaptor. it wont even read original xbox games.

Link to comment
Share on other sites

If the version of bios doesn't support a 2tb hard drive that nothing will work and some of the Evox bios files that are out there only support up to 160gb hard drives.

Flash the mod chip with the Cerbios 2.2.1 beta as that will support up to a 8tb hard drive and works on all versions of Xbox.

Here is a copy and make sure you have a look at the readme file 

I would use the " Cerbios Hybrid V2.21 BETA UDMA4 "

https://drive.google.com/file/d/1zT7xiaHzlfu40-FXtqRXPGTu722YdRAa/view?usp=share_link

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.