syfer1987 Posted February 27, 2023 Report Share Posted February 27, 2023 (edited) Hi can some help me my Xbox has broken ied port see pic i know i can unweld this. What is this part called so i can buy this i show some on ebay 5Pcs 2.54mm 0.1" Pitch 2x30 Pin 60 Pin IDC Male Box Header Flat Cable Connector it looks the same but have no clue if it will work. Edited February 27, 2023 by syfer1987 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted February 27, 2023 Report Share Posted February 27, 2023 12 hours ago, syfer1987 said: my Xbox has broken ied port see pic If you mean the missing pin in that IDE connector that's normal. 12 hours ago, syfer1987 said: i know i can unweld this Unsoldering 40 pin connectors requires a lot of practice as there is a high chance you could/will damage the board. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted February 27, 2023 Report Share Posted February 27, 2023 14 hours ago, syfer1987 said: Hi can some help me my Xbox has broken ied port see pic i know i can unweld this. What is this part called so i can buy this i show some on ebay 5Pcs 2.54mm 0.1" Pitch 2x30 Pin 60 Pin IDC Male Box Header Flat Cable Connector it looks the same but have no clue if it will work. It's not broken. The port is 40 pins - well 39 since one is used to key the connector so it can't be installed the wrong way, not 60 that you state for a replacement part. Quote Link to comment Share on other sites More sharing options...
syfer1987 Posted March 3, 2023 Author Report Share Posted March 3, 2023 No i mean the outer plastic piece has broken the pins are all intact. Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted March 3, 2023 Report Share Posted March 3, 2023 2 hours ago, syfer1987 said: No i mean the outer plastic piece has broken the pins are all intact. Unless the clamp itself has snapped, you should be able to clamp it back to the ide cable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.