i recently softmodded my 1.4 original Xbox and added a 3TB HDD, however I am not sure I have all the space I was supposed to get. I understand Xbox should only recognize about 2.3-2.5TB however I am not seeing all of my space showing up. Furthermore, there’s several smaller partitions.
Can I expand my existing partitions, what is the best way to get the most space out of my current set up? I could redo the whole process if needed.
Any help would be appreciated! Thanks !
Please login or register to see this attachment.
I can’t seem to find a clear answer anywhere. Do I remove the jumper pin from the sata HDD since the sata/ide adaptor has its own jumper pin selections? I just need to know the configuration so I can clone it using chimp. Any help would be appreciated thanks!
Just fired up my xbox after being sat there for many months. It made a pop type sound and after 10 minutes of play started to make a beeping noise with error 7.
I've pulled the hdd out and it makes the same beeping noise in an external caddy.
I've done a little bit of research and it seems that if I use an old ata hdd (40gb) I can use something called Hexen to build the drive. As I have an xecuter chip I don't need to worry about locking the drive. Can somebody please advise if this is correct?